Page 1 of 1
Code for GE DVD for 15-100 remote?
Posted: Thu Dec 23, 2010 8:01 am
by Jim14
I picked up a couple 15-100 and may add the JP1 connector. But for now I am just using the built in codes. I have a DVD player: GE1101PB. I have tried the codes listed (20522, 20815, 20717) but no success. Is it possible that another code would work or do I need to use JP1?
I have noticed that most of my other equipment uses codes that are similar to the shorter codes used for the 1994 remote but others are completely different even though similar codes are listed. This is a completely different issue and just wondering if this is correct. BTW, I haven't tried the 1994 with the DVD player.
Posted: Thu Dec 23, 2010 8:42 am
by vickyg2003
First of all, try each of those codes again, and try ALL the keys again. To make sure that that none of them work. The 20717 has been reported to use different power codes, and if you only tried the power key, you may have missed it.
If those don't turn up ANY functions
[2]0000
[2]0035
[2]0048
[2]0060
[2]0149
[2]0202
[2]0240
[2]0807
[2]1035
[2]1060
If none of the these setup codes turn up any functionality, try a *990 code search.
If you turn up ANY functionality report it back here, and we'll have something to work with.
Posted: Thu Dec 23, 2010 4:37 pm
by Jim14
Thanks. I got 20717 to work on the 3rd try. Part of the issue is that the remote has limited functionality (power is a manual button only, for one). I finally did some side by side tests with the original remote to make sure the functions I was trying worked with the original remote.
Posted: Thu Dec 23, 2010 5:35 pm
by The Robman
Jim, do you still not have a JP1 cable for any of your remotes? Your "toggle" post was in the General JP1 forum, so we all assumed that you were a JP1 user now.
Posted: Thu Dec 23, 2010 5:54 pm
by vickyg2003
Jim14 wrote:Thanks. I got 20717 to work on the 3rd try. Part of the issue is that the remote has limited functionality (power is a manual button only, for one). I finally did some side by side tests with the original remote to make sure the functions I was trying worked with the original remote.
I'm a little confused as to how this would not work, but glad you got it working now. Now we know what kind of signals the remote uses and we have an upgrade for a GE DVD player that uses the same signal structure.
This upgrade should have EFC's for any missing function.
GE1101P 20
Good luck