View previous topic :: View next topic |
Author |
Message |
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sat Dec 08, 2012 10:40 am Post subject: Interface ?? |
|
|
I currently have the
USB JP1 cable delcom
Serial JP1.2/3 DiY (6 years old and the ribbon cable is separating)
I have purchased and ruined 3 of the USB JP1.2/3 cables to serve as a backup for my Serial JP1.2/3 cable. The USB versions just don't hold up to the number of uploads I do. Writing protocols and extenders has me doing a couple of hundred upload/downloads a week. The cables become really flaky and die within a couple of months.
I am in the process of ordering a new Win 7 64-bit computer, while I can still get one.
Am I correct in assuming that my JP1 delcom driver is not going to work on the Windows 7 64 bit computer?
Will the itty-bitty adapter, work with the serial JP1.2/3 cable?
Will the gasoline-priced cables work with the itty-bitty adapter?
With Tommy's supply problem, I am really nervous about not having a backup for my cables. I need to know how to proceed. |
|
Back to top |
|
|
carsonlittle
Joined: 02 Dec 2012 Posts: 62
|
Posted: Sat Dec 08, 2012 6:43 pm Post subject: Re: Interface ?? |
|
|
vickyg2003 wrote: | I currently have the
USB JP1 cable delcom
Serial JP1.2/3 DiY (6 years old and the ribbon cable is separating)
I have purchased and ruined 3 of the USB JP1.2/3 cables to serve as a backup for my Serial JP1.2/3 cable. The USB versions just don't hold up to the number of uploads I do. Writing protocols and extenders has me doing a couple of hundred upload/downloads a week. The cables become really flaky and die within a couple of months.
I am in the process of ordering a new Win 7 64-bit computer, while I can still get one.
Am I correct in assuming that my JP1 delcom driver is not going to work on the Windows 7 64 bit computer?
Will the itty-bitty adapter, work with the serial JP1.2/3 cable?
Will the gasoline-priced cables work with the itty-bitty adapter?
With Tommy's supply problem, I am really nervous about not having a backup for my cables. I need to know how to proceed. |
I discovered a CP2102 based cable that should be a drop in replacement for Tommy's, but I am awaiting confirmation: http://www.hifi-remote.com/forums/viewtopic.php?p=107187#107187
This USB<->Serial cable talks 5v and 3v3 though - not RS232 levels, so you won't need either of the cables that you have.
.. and if thanks pan out, pretty soon, you will require just one device for all the variants we have right now.
BTW - replacing the IDC cables are pretty easy, as these variants don't need a complicated crimping tool.
I don't have a guide to help you do this yourself, but anyone who has built his own cables should be able to tell you how ... or you can ship the cables to me and I will replace them. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat Dec 08, 2012 6:50 pm Post subject: |
|
|
Quote: | Am I correct in assuming that my JP1 delcom driver is not going to work on the Windows 7 64 bit computer? | We think it works using the 64 bit WinUSB driver.
Rob is using one with 64 bit Windows, and aclinml says both he and a friend got it to work.
I have access to a 64 bit Win7 computer. Over the next week, I'll try installing to see if the instructions can be tightened up. I suspect that it is only necessary to have the .inf file, since the WinUSB drivers themselves are included in Win7. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Sat Dec 08, 2012 7:39 pm Post subject: |
|
|
I do have 64-bit Win 7 and all my JP1 cables work _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Dec 09, 2012 4:07 am Post subject: |
|
|
Thank you all for the responses.
It is good to know I can get a windows 7 64 computer and still pursue this hobby.
BTW as a delcom connection tip, the Widget causes my remote not to be found in RMIR. I need to unplug the widget in order to see the remote. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
Tommy Tyler Expert
Joined: 21 Sep 2003 Posts: 412 Location: Denver mountains |
Posted: Mon Dec 10, 2012 8:16 pm Post subject: |
|
|
Vicky, don't know if you noticed my latest catalog page but I'm now selling a JP1 EEPROM Interface that uses the FTDI chip and driver that works on nearly everything.
Tommy |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Dec 11, 2012 8:14 am Post subject: |
|
|
No Tommy, I didn't realize you were open for business again. I'll check it out. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
|
Back to top |
|
|
|