View previous topic :: View next topic |
Author |
Message |
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Thu Nov 25, 2010 11:54 pm Post subject: |
|
|
cbutkus wrote: |
Thanks. So what software would I need to actually develop one of these extenders? Is there a how-to somewhere? I'm a long time programmer, so I'd be interested in what's involved. |
The term I would use is "tweak a protocol", and the tool you'd need is a protocol builder. Protocol builder or PB, is an Excel spreadsheet.
In the Protocol files section you'll find Protocol Builder, and some help documents.
Sometimes this is pretty easy. Sometimes you just need to change a parameter in protocol builder and everything is done for you, but in this case the protocol contains quite a bit of assembly code. So you need to understand the assembler and make the adjustments.
There isn't really anything that I found to be a good how-to guide on this. PB had me stumped for a long time. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Nov 26, 2010 9:28 am Post subject: |
|
|
I started to look at this, and when I was preparing a folder on my PC to hold my project, I found I already had a GI Cable folder. I found that Rob wrote a GI Protocol that a user needed to HOLD key C for 8 repeats for use in macros. Unfortunately there isn't an HCS08 version, but I think that indicates that it would be best to force 1 repeat and then allow a hold version too. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Nov 26, 2010 6:32 pm Post subject: |
|
|
cbutkus, I attempted to create an upgrade with a protocol that sends an upgrade.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9167
I've zipped a PB file and an RDMU file together to get you started. Normally I would test this prior to posting, but you know my situation. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
cbutkus
Joined: 30 Apr 2006 Posts: 13
|
Posted: Sat Nov 27, 2010 2:25 am Post subject: |
|
|
I will try have a look at this tomorrow. Thanks! |
|
Back to top |
|
|
|