Denon 3808A: Discrete commands for Audyssey dynamic EQ/Volum
Posted: Tue Mar 30, 2010 9:40 am
I stumbled upon this thread on Remotecentral, containing discrete codes for Audyssey dynamic volume settings. DecodeIr reveals that this is denon_k, device 4, subdevice 1, commandnumbers 749, 750, and 748 respectivelly. Fumbling around, I found discrete commands for the dynamic EQ(-ualization) and volume (command numbers 745,746, 747).
(The functionallity was added in a software update in the end of 2008. Although lots of IR command are documented at Denon's site, these, added in the upgrade, appear not to documented.)
Summarizing:
Device: Denon AVR-3808A, almost surely also 4308A, probably also others with Audyssey. Protocol: denon_k, device: 4, subdevice: 1
Command numbers (OBC):
(The functionallity was added in a software update in the end of 2008. Although lots of IR command are documented at Denon's site, these, added in the upgrade, appear not to documented.)
Summarizing:
Device: Denon AVR-3808A, almost surely also 4308A, probably also others with Audyssey. Protocol: denon_k, device: 4, subdevice: 1
Command numbers (OBC):
- 745 Audyssey Dyn Vol/EQ ON
- 746 Audyssey Dyn EQ ON
- 747 Audyssey Dyn Vol/EQ OFF
- 748 Audyssey Dyn Vol Midnight
- 749 Audyssey Dyn Vol Evening
- 750 Audyssey Dyn Vol Day