View previous topic :: View next topic |
Author |
Message |
rrodscott01
Joined: 26 Mar 2009 Posts: 3
|
Posted: Thu Mar 26, 2009 7:09 pm Post subject: jWIN JD-VD130 DVD player |
|
|
1. Device: jWIN JD-VD130
2. Type of device: DVD player
3. Year: 2004?
4. JP1/UEI Remote model: MIL4
5. Do you have a JP1 cable? yes
6. Still have original remote? no
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? n/a
I tried the code for the jd-vd135 and it didn't work. The 135 looks like one of those generic DVD players that sell for about twenty bucks and the 130 looks totally different. This player doesn't have any navigation buttons on the case so all I can do is "open" "close" "stop" and the "menu" button is locked so I'm stuck with subtitles. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Apr 26, 2009 7:12 pm Post subject: |
|
|
The code you tried was a Nec1 Device 4,
Try a Nec1 device 0
Here are a few EFC codes for you to try
from Video DVD 1049
057 NUM1
184 NUM2
185 NUM3
from Video DVD 1051
118 NUM4
120 NUM5
122 NUM6 |
|
Back to top |
|
|
rrodscott01
Joined: 26 Mar 2009 Posts: 3
|
Posted: Sun May 17, 2009 10:13 pm Post subject: nec1 dev0 |
|
|
How do I try nec1 dev0 on my mil4? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon May 18, 2009 7:14 am Post subject: |
|
|
Quote: | How do I try nec1 dev0 on my mil4? |
You do this much like you did with the JD-vd135. You open KM or RM, change the remote to the MIL4, give it a setup code, pick Nec1, Dev 0
and then put some the EFC's that go with a these codes, copy it to IR, assign it to a device, upload it to your remote and see if your DVD player responds when you push the button.
I gave you numbers before, but with a DVD player I should have given you navigational keys to try, since a cheapy DVD player might not use the numbers.
Try these Nec1 Dev 0 codes
Power 052
Menu 187
Up 164
Down 037
Right 165
Left 036
Or
Power 244
Menu 100
Up 182
down 183
right 185
left 186
Remember, I gave these to you as EFC's. |
|
Back to top |
|
|
rrodscott01
Joined: 26 Mar 2009 Posts: 3
|
Posted: Wed May 20, 2009 1:21 am Post subject: populating the other fields |
|
|
I got the arrow keys to work using the top set of EFCs. Is there a way to know which EFCs to assign to the other buttons or is it just trial and error?
This is interesting but I am ignorant of this stuff. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri May 22, 2009 8:59 pm Post subject: |
|
|
Here are some EFC's to try.
num 0 169
num 1 057
num 2 184
num 3 185
num 4 043
num 5 170
num 6 171
num 7 039
num 8 166
num 9 167
Vol+ 106
Vol- 244
Mute 245
Ch+ 101
Ch- 100
Power 052
Menu 187
Guide 058
Up 164
Down 037
Left 036
Right 165
Info 116
Prev/Last Ch 234, 055
OK 182
Sleep/Timer 233
CC 038, 232
Exit 059
+100 168
Format 16:9 235
Enter/# 168
Play 105
Stop 232
Rewind 228
FFwd 229
Pause 233
Record 181
Skip+ 101
Skip- 100
Replay 055
Settings 187 |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Sat Feb 04, 2012 8:08 pm Post subject: Re: jWIN JD-VD130 DVD player |
|
|
rrodscott01 wrote: | 1. Device: jWIN JD-VD130
4. JP1/UEI Remote model: MIL4
5. Do you have a JP1 cable? yes |
Found a match and recorded the IR signals with the JP1 tools to create the respective files.
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|