JP1 Remotes

greenough1 · Joined: 30 Jan 2005 Posts: 659

My bad on misreading the file. Not sure what's wrong.

jeff

The Robman · Posted: Fri Mar 20, 2009 9:51 am Post subject:

Re: the EXIT button.

You have correctly programmed EFC 117 to the Exit button as part of your SAT/2004 upgrade, but you are blocking it from working because you have a keymove on the EXIT button in SAT mode. It's the first keymove in your keymove list.

Re: the FAV button.

The URC-8910 is one of the older remotes that requires special programming in order to program the FAV button. You can either use an extender, or you can use the "Fav/Scan Programmer" protocol available in the Special Protocols spreadsheet.

Re: the COM SKIP button.

You can only program this button if you use an extender.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

tpaxadpom · Joined: 19 Sep 2007 Posts: 64

Thanks again for helping me guys!

Rob,
SAT 2002 is assigned to AUX and controls Samsung OTA HD receiver. So if I delete the keymove button in IR.exe for 2002, should I get the exit button working for SAT 2004?
What if I create an upgrade for Samsung OTA HD receiver and use CABLE template (CABLE 2005), would it eliminate the conflict?

I will have to do some reading on extenders and fav/scan programmer. Thanks for pointing me in the right direction.

The Robman · Posted: Fri Mar 20, 2009 2:20 pm Post subject:

tpaxadpom · Joined: 19 Sep 2007 Posts: 64

Thanks Rob.
I will redo keymove for Aux (SAT 2002). So right now when I press exit in SAT 2004 mode remote sends command for SAT 2002.
Though alternatively I should be able to achieve the same result if I created upgrade for my samsung HD OTA in CABLE mode. Then AUX would be assign to CABLE and keymove wouldn't interfere with SAT 2004 upgrade.

Are there any specific threads that you recommend reading to learn spec protocol for fav/ extenders?

PS: I really like this remote control. I've tried a few touch screens in the past but preffer buttons. With this remote I never have to look at it to see what I'm doing.

The Robman · Posted: Fri Mar 20, 2009 5:03 pm Post subject:

gfb107 · Expert Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC

You have to understand what the remote does when you press a key.

First it looks for to see if there is a macro assigned to that key. If there is a macro, it runs the macro.

If there isn't a macro assigned, then it looks for a keymove assigned to the key under the current device button (not setup code). If it finds one, it sends the signal for the keymove.

If there isn't a keymove, then it looks at the setup code associated with the device button, and checks if there is a function assigned to the key. If it finds one, it send the signal for the function.

If it doesn't find anything, it does nothing.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

I think you are confusing device types with device buttons. If you want the keymove to function in AUX mode, pick AUX as the bound key device in your keymove, not SAT.