JP1 Remotes

1. Device: Panasonic DMP-DB35K
2. Type of device: Blu-ray/DVD Player
3. Year: 2008
4. JP1/UEI Remote model: URC-6131
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? No
9. Partially working setup code? Yes
10. Learning remote question? No

I don't see any DMP-series in the file section. I used the Panasonic DVD master v2 code here:

https://www.hifi-remote.com/forums/dload ... le_id=4753

But there are many, many buttons missing. Namely, the POP-UP MENU, STATUS, FUNCTIONS, RE-MASTER, PIP, SECONDARY AUDIO, etc

I uploaded one just now... https://www.hifi-remote.com/forums/dload ... le_id=6055

So, just to confirm, the buttons in that upgrade do work (so that tells us the protocol and device code), you are just looking for the codes for the additional buttons that you mentioned, correct?

If nobody steps forward with the correct codes, you could try testing the gap OBCs to see if they do anything. However, this upgrade uses two sub-device codes, 1 for some of the EH55 functions and 0 for the rest. I would suggest starting with the 0 sub-device.

Yes, that's what I meant. The code works but buttons are missing.

mr_d_p_gumby, thanks for the upload. The code seems to work. However, when I open it using the latest KM spreadsheet. It says Key Move not allowed. So I cannot program several buttons. Do you know what's wrong?

I've just taken a closer look at the master file and the new file that Mike loaded, and of the 6 buttons that you said were missing (ie, POP-UP MENU, STATUS, FUNCTIONS, RE-MASTER, PIP, SECONDARY AUDIO), 3 of them were already in the master file (ie, STATUS, FUNCTIONS, RE-MASTER) and 3 of them were missing (ie, POP-UP MENU, PIP, SECONDARY AUDIO).

I have added the 3 missing buttons to the RM master file here:
https://www.hifi-remote.com/forums/dload ... le_id=4753

and the KM master file here:
https://www.hifi-remote.com/forums/dload ... le_id=6057

Regarding your question about keymoves, the problem with all of these upgrades is that they all use 2-byte variable data and the URC-6131 remote is unusual in that it doesn't support 2-byte keymoves.

To that end, I have split the master into two so that it can use the standard 1-byte Panasonic protocol.

Here's part1 (which includes most of the buttons):
https://www.hifi-remote.com/forums/dload ... le_id=6058

And here's part2 (with the remaining 9 buttons):
https://www.hifi-remote.com/forums/dload ... le_id=6059

The way you would use these upgrades is like this, first open the first upgrade and assign the buttons exactly how you want them (including keymoves) and then add the upgrade to IR. Then, open the second upgrade and keep all the button assignments blank, then switch to the keymoves tab and assign the buttons how you want them, then add this upgrade to IR and add the keymove block to IR.

Thanks for the updates and explanations!