Page 1 of 1
Toshiba SD-H400
Posted: Mon Jan 12, 2004 12:28 pm
by 89formula
Tivo/DVD player combo. I need a KM file if anyone can help. OFA 8910, I dont have the original remote. I really just need the discrete code for the Thumbs Down. I am new at this JP1, but I can use the discrete code in my PDA Omniremote. I can get the OFA to run the DVD part, but no thumb. All other Tivo codes I try wont do it either.
Posted: Mon Jan 12, 2004 1:33 pm
by The Robman
Does the regular VCR/0618 code work the Tivo functions?
Posted: Mon Jan 12, 2004 2:21 pm
by 89formula
No. Codes for Toshiba DVD players get all DVD functions, and I can navigate the Tivo menus, but no "thumbs". I need to reset, which requires 3 thumbs down to confirm the process.
Posted: Mon Jan 12, 2004 3:23 pm
by The Robman
Apparently my buddy "edmund" from the RC forums has been looking in here because he just gave me the Tivo EFCs:
145 Thumbs up
141 Thumbs down
029 Tivo
033 LiveTv
059 Quick
163 Guide
Posted: Tue Jan 13, 2004 8:18 am
by 89formula
Thanks, got what I need. I appreciate the help.
Posted: Sun May 16, 2004 2:58 pm
by cord
Sorry to ask a dumb question, but I'm not very knowledgable about all this. I need the same thing as asked in the original request, but I don't really understand the replies. Could somebody give me a bit of an outline of what I need to do to get my SDH400 to be fully functional with my URC-6131 or RS 15-1994?
Posted: Sun May 16, 2004 3:37 pm
by The Robman
Use the Toshiba DVD setup code, then program the PVR buttons using the advanced codes I posted.
Posted: Sun May 16, 2004 4:26 pm
by cord
Umm....what?
Do you mean I should use ir.exe to tell the 6131 that my PVR button should map to 0503, then use the key moves tab to bind the Thumbs_Up key to 0503's button with EFC 145?
If that's what you mean, I tried that, and it didn't work.
Posted: Sun May 16, 2004 6:05 pm
by The Robman
Do it on the remote rather than through IR.exe and it will work.
Posted: Sun May 16, 2004 7:11 pm
by cord
Oh, I see. As usual, I'm over-complicating things. Thanks, Rob!
Posted: Tue Jan 10, 2006 2:55 pm
by jptheripper
does anyone know of discrete on off codes for this model? or are they included in the toshiba dvd set
Posted: Tue Jan 10, 2006 4:12 pm
by Capn Trips
Toshiba is notorious for NOT having discrete on and off codes, and a quick scan of the usual places revealed none.
Have you tried the usual work-arounds? Like does "Play" also turn the unit on? If so, "Play-Stop" is a discrete On macro and "Play-Power" is a discrete Off macro. If not "Play" then maybe "Open/Close" will power up the unit?
Else you may have to install and use the ToadTog protocol to simulate discrete functions.
Posted: Tue Jan 10, 2006 5:12 pm
by MaskedMan
The H400 uses the standard toshiba dvd code 0503. No discretes.
http://www.tivocommunity.com/tivo-vb/sh ... did=185448
Posted: Tue Jan 10, 2006 7:48 pm
by jptheripper
okay thanx for the info.. ill try a couple things
Posted: Wed Jan 11, 2006 8:04 am
by jptheripper
the "live tv" button turns on the sd-h400. So it looks like "live-tv" works as a discrete on, and "live-tv, power" works as a discrete off!!
yeah all my components have discretes now (including my xbox
so off to macro programming