JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

202608 Charter OCAP C4000 URC-1060BC2 RDF Updates
Goto page 1, 2  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs
View previous topic :: View next topic  
Author Message
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Fri Sep 13, 2024 10:08 am    Post subject: 202608 Charter OCAP C4000 URC-1060BC2 RDF Updates Reply with quote

Split from:
http://www.hifi-remote.com/forums/viewtopic.php?t=103179

Finding more features of this remote not sure how to add to RDF
so far i have added [SpecialProtocols]
DSM=Internal:0
I also found out that this remote supports MultiMacro on practically every key
problem i have is if i use the [MultiMacros] list in the RDF i would have to list every key
if i use macrosupport=3 i also get Real time macro as an option
I tried this and just put dummy data for RealTimeMacroData so RMIR would not error out
Maybe this remote supports Real time macro too but i have no idea where the data would be. If it doesn't support RTM then how write RDF for Multimacro
Here is my test RDF

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26962
_________________
Randy
Back to top
View user's profile Send private message
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Fri Sep 13, 2024 10:40 am    Post subject: Charter/Spectrum URC-1060 newer or older version RMIR no RDF Reply with quote

Forgot to mention
I added "ondemand " $34 to [ButtonMaps] 1,2,and 3
as long as cable device is not set to setup code 1877 the button is unlocked from the cable device and i have put multimacros on it for other devices and as far as i can tell it actuallly is in the maps and not a keymove
_________________
Randy
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4572
Location: Cambridge, UK

                    
PostPosted: Fri Sep 13, 2024 1:17 pm    Post subject: Reply with quote

HamburgerHelper1 wrote:
I tried this and just put dummy data for RealTimeMacroData so RMIR would not error out

Is there any problem caused by the dummy data? I can't think of a better way without needing to modify RMIR, and it doesn't seem worth the effort to do so if dummy data works.
_________________
Graham
Back to top
View user's profile Send private message
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Fri Sep 13, 2024 1:35 pm    Post subject: Charter/Spectrum URC-1060 newer or older version RMIR no RDF Reply with quote

mathdon wrote:
HamburgerHelper1 wrote:
I tried this and just put dummy data for RealTimeMacroData so RMIR would not error out

Is there any problem caused by the dummy data? I can't think of a better way without needing to modify RMIR, and it doesn't seem worth the effort to do so if dummy data works.

No it does not give any functional problems and I agree it's not worth wring into RMIR
The only draw back is that a person will see Real time Macro displayed when they make a macro but of course they do not work
If i make a real time macro they just disappear upon upload
_________________
Randy
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21454
Location: Chicago, IL

                    
PostPosted: Fri Sep 13, 2024 7:21 pm    Post subject: Reply with quote

The original remote in this thread is the 367803 (Charter OCAP 4-Device).

Randy is talking about the 202608 (Charter OCAP C4000 URC-1060BC2).

So, these are different remotes.

Here are some threads on the 202608 remote.

1. This is where we figured out how to add protocol upgrades:
http://www.hifi-remote.com/forums/viewtopic.php?t=15833

2. This is the patch to fix keymoves and macros:
http://www.hifi-remote.com/forums/viewtopic.php?t=16102

3. Some others:
http://www.hifi-remote.com/forums/viewtopic.php?t=15980
http://www.hifi-remote.com/forums/viewtopic.php?t=103000
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!


Last edited by The Robman on Sat Sep 14, 2024 2:32 pm; edited 3 times in total
Back to top
View user's profile Send private message Visit poster's website
SysTech_Larry



Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA

                    
PostPosted: Fri Sep 13, 2024 10:48 pm    Post subject: Reply with quote

It is the same as my C4000 outwardly. Are there two different internal configurations?
_________________
SysTech Larry
Back to top
View user's profile Send private message
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Sat Sep 14, 2024 6:19 am    Post subject: Charter/Spectrum URC-1060 newer or older version RMIR no RDF Reply with quote

SysTech_Larry wrote:
It is the same as my C4000 outwardly. Are there two different internal configurations?


Yes they are two different internal configurations
Sorry for the confusion i should have started a new thread
Yes Larry i am using your version of the remote
I did not plan on working on it this much due to time limits but
now that i have i found other features to the remote
So i was only looking at what is the best solution to how to add to the RDF
without affecting RMIR
I will tell results shortly
_________________
Randy
Back to top
View user's profile Send private message
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Sat Sep 14, 2024 7:52 am    Post subject: 202608 (Charter OCAP C4000 URC-1060BC2 Reply with quote

Changes to exiting RDF
1 added special protocol dsm=0
2 added $34 to maps 1,2,3
3 added a MultiMacro list
May need refining but works
Experts needed to decide if it should replace original


http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26963
_________________
Randy
Back to top
View user's profile Send private message
SysTech_Larry



Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA

                    
PostPosted: Sat Sep 14, 2024 1:40 pm    Post subject: Reply with quote

The Robman wrote:
The original remote in this thread is the 367803 (Charter OCAP 4-Device).

Randy is talking about the 202608 (Charter OCAP C4000 URC-1060BC2).

So, these are different remotes.

My son has one of the two. Is there a surefire way to tell them apart?
Mine is stamped "Spectrum," where his is stamped "Charter."
_________________
SysTech Larry
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21454
Location: Chicago, IL

                    
PostPosted: Sat Sep 14, 2024 2:09 pm    Post subject: Reply with quote

SysTech_Larry wrote:
My son has one of the two. Is there a surefire way to tell them apart?
Mine is stamped "Spectrum," where his is stamped "Charter."

There are probably clues on the remote somewhere, but the one sure fire way to differentiate them is to do a download. If the name of the remote that gets displayed isn't convincing, go to the Raw Data tab where the signature is displayed.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
HamburgerHelper1



Joined: 22 Feb 2014
Posts: 634

                    
PostPosted: Sat Sep 14, 2024 2:40 pm    Post subject: 202608 Charter OCAP C4000 URC-1060BC2 RDF Updates Reply with quote

The 2 I have there is a sticker in the battery compartment you could look there
BTW mine are 1060BC3-0780-001-R
_________________
Randy
Back to top
View user's profile Send private message
SysTech_Larry



Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA

                    
PostPosted: Sat Sep 14, 2024 5:20 pm    Post subject: Reply with quote

Thanks.

My sticker is not so clear. I am guessing that when I upload his contents, RMIR will decide which one it is.
_________________
SysTech Larry
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21454
Location: Chicago, IL

                    
PostPosted: Sat Sep 14, 2024 7:32 pm    Post subject: Reply with quote

SysTech_Larry wrote:
Thanks.

My sticker is not so clear. I am guessing that when I upload his contents, RMIR will decide which one it is.

Don't upload random files into remotes, always start with a download first, that will tell you what remote it is. If your saved rmir file is from a different remote (even if they look the same on the outside), you can't upload it into this remote.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
SysTech_Larry



Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA

                    
PostPosted: Sat Sep 14, 2024 7:53 pm    Post subject: Reply with quote

Thanks. (That is what I meant.)
In that exchange, I get confused about
  • which is the upload [from my computer?] and
  • which is the download [to my computer?].

_________________
SysTech Larry
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21454
Location: Chicago, IL

                    
PostPosted: Sat Sep 14, 2024 8:01 pm    Post subject: Reply with quote

You download from the remote into the computer, then upload from the computer into the remote.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs All times are GMT - 5 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control