Page 1 of 2

Help with JP1.x pinout

Posted: Sat Jul 06, 2024 10:20 am
by jackching
Can anyone help me determine the pinout for this model: https://www.ebay.com/itm/312234679584

It is the independent version. The colors he has listed on that site doesn't match up with the actual colors of the wire for the independent version. Maybe there is a way with an ohm meter?

I know it works because i had it working with a different remote before. I took a picture of the layout but you know i lost it!

Posted: Sat Jul 06, 2024 11:31 am
by mdavej
If the colors match after all, this is how it goes.

1 - RTS (Yellow)
2 - (empty)
3 - GND (Black)
4 - TXD (Green)
5 - RXD (White)

If they don't, I'd crack open the shell and look at the board. It's usually labeled.

Posted: Sat Jul 06, 2024 11:44 am
by jackching
mdavej wrote:If the colors match after all, this is how it goes.

1 - RTS (Yellow)
2 - (empty)
3 - GND (Black)
4 - TXD (Green)
5 - RXD (White)

If they don't, I'd crack open the shell and look at the board. It's usually labeled.
As i said, the colors dont match. If you pick the independent version on that page theres a pink wire and a grey wire. That's the one i have

Posted: Sat Jul 06, 2024 11:49 am
by mdavej
Like I said, crack it open if they don't match. I don't see any pink and grey, no matter what I pick. Otherwise you're looking at trying all 15 combinations and risking bric king your remote. You could find Vcc with a meter. But Rx, Tx and others would require a scope and some way to produce a signal. Far more effort than just looking at the board.

Posted: Sat Jul 06, 2024 12:06 pm
by jackching
mdavej wrote:Like I said, crack it open if they don't match. I don't see any pink and grey, no matter what I pick. Otherwise you're looking at trying all 15 combinations and risking bric king your remote. You could find Vcc with a meter. But Rx, Tx and others would require a scope and some way to produce a signal. Far more effort than just looking at the board.
I didnt see that bottom line about cracking it open. I got it now. Thanks

Posted: Sun Jul 07, 2024 7:33 pm
by The Robman
If the seller sent you a cable where the colors of the wires don't match the colors in his listing, I would write to him and ask him to tell you what each wire is.

Just out of curiosity, what are the 6 colors of the wires on your cable? Could you post a photo?

Posted: Mon Jul 08, 2024 5:45 pm
by jackching
The Robman wrote:If the seller sent you a cable where the colors of the wires don't match the colors in his listing, I would write to him and ask him to tell you what each wire is.

Just out of curiosity, what are the 6 colors of the wires on your cable? Could you post a photo?
Same colors as on the link in post 1. Choose the independent wire when you get there and look at the picture

Posted: Mon Jul 08, 2024 6:27 pm
by mdavej
If there are numbers on the connectors, you could try:
JP1-Cable
1 - 1
3 - 2
4 - 4
5 - 6

Posted: Mon Jul 08, 2024 6:33 pm
by jackching
Post 5 i said I got it. lol. They were labelled inside the case

Posted: Mon Jul 08, 2024 6:45 pm
by mdavej
Awesome. Thought you meant you understood my answer, not that you solved it, LOL. Mind posting the solution in case someone else ends up with the same cable?

Posted: Mon Jul 08, 2024 6:54 pm
by jackching
Just pop open the case. They're all labelled on the PCB of the usb.

Posted: Thu Jul 11, 2024 9:35 am
by The Robman
jackching wrote:Just pop open the case. They're all labelled on the PCB of the usb.
It would still be useful to those of us that don't have the cable to pop open, if you would post the solution, because the next person might not want to open the cable.

Posted: Thu Jul 11, 2024 10:16 am
by jackching
Grey = RTS
Green = TXD
White = RXD
Black = Ground

Im trying to upload the photo with the case off and it keeps telling me the file is too big even though max size says 8mb, the file is only 3.5mb. I even tried zipping it.

Posted: Thu Jul 11, 2024 11:18 am
by The Robman
jackching wrote:Grey = RTS
Green = TXD
White = RXD
Black = Ground
Aren't there 6 wires on this cable?
jackching wrote:I'm trying to upload the photo with the case off and it keeps telling me the file is too big even though max size says 8mb, the file is only 3.5mb. I even tried zipping it.
http://www.hifi-remote.com/forums/viewtopic.php?t=6557

Posted: Thu Jul 11, 2024 11:43 am
by jackching
The Robman wrote:
jackching wrote:Grey = RTS
Green = TXD
White = RXD
Black = Ground
Aren't there 6 wires on this cable?
jackching wrote:I'm trying to upload the photo with the case off and it keeps telling me the file is too big even though max size says 8mb, the file is only 3.5mb. I even tried zipping it.
http://www.hifi-remote.com/forums/viewtopic.php?t=6557
The last time i checked we only used 4 wires

https://i.imgur.com/VamSgjC.jpeg

Image