JP1 Remotes

[Bonzo]

1. Device: Rjtech RJ-900ATSC
2. Type of device: ATSC to NTSC Set Top Box
3. Year: 2008
4. JP1/UEI Remote model: RCA RCU810
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? No


I am looking for the setup for a Rjtech RJ-900ATSC remote.
I have checked the file sections, but cannot find it.
I bought this ATSC to NTSC converter box at a swap meet, and it did not come with a remote.
The vendor had a number of them, said it was complete, but I did not open it 'til I got home.
This set top box just received FCC approval earlier this year, but already seems to have been discontinued!
I use the RCA RCU810 learning remote, but I have nothing to learn!

[greenough1]

A bit of googling shows that the rjtech rj-1000ATSC STB shares some codes with the toshiba 62HM196. For a two similar panels, I see for both NEC1, 64. For both it looks like the protocol is 00 5A (but this is stretching my knowledge).

Check these two upgrades:
Toshiba 37AV500U_LCD KM
Toshiba 47HL167 RM

Here are some one for all toshiba TV setups: 0154 0156 0060 1256. You might try the RS toshiba setups and see if you get any traction.

jeff