JP1 Remotes

programing RCAP05BR remote control for windows7 media center
I have a RCA remote anyone know the code to program for w7mc?plus the procedure. I also have a HP IR blaster and a wmc remote prefer to use the RCA to control all.
thanks

I'd try CBL 1272 or DVD 1972 with the HP dongle.

excellent cbl 1272 worked fine now all the buttons appear to be mapped.

will I have to learn a green button for the RCA? I can use the live TV button from my harmony700 to startup w7mc.(I prefer to keep it in the toolbar)
or should I use the HP w7mc remotes green button?

additionally: I would like to jump directly to a channel by pressing it's #
like I'm watching 8 then press 12 the screen goes black and stays on 8 even if I press enter after the 12.

the initial RCA the second and now the third RCA all did this.

thanks Dave you the man I'm taking notes.

I think the green start button is EFC 00042. Program it like this:
http://www.hifi-remote.com/wiki/index.p ... gle_device

Not sure what to do about the channels. You could try adding a 0 at the beginning, i.e., 012.

here is the RMDU file I use for Windows media center and Xbox 360

http://www.hifi-remote.com/forums/dload ... e_id=26467

EFC 42 /OBC 13 is start (the green button)

To select a channel, enter the channel number followed by the "OK" button EFC 35 / OBC 34.

However, if I enter a channel number without the "OK" the channel is selected after a few second timeout.

Entering "OK" without numbers goes to prior channel.

EFC 170 /OBC 29 is dash/dot for sub channels

I map dash/dot to the button left of zero and OK to the right of zero so I can change channels with one hand using my thumb to press the buttons