| View previous topic :: View next topic |
| Author |
Message |
jackching
Joined: 27 Feb 2018
Posts: 125
|
 Posted: Sat Oct 30, 2021 9:40 am Post subject: Bell Satellite 5.4 ir |
 |
|
| I have a satellite remote with 6 solder connections on the bottom of the board and want to determine if they are jpx.x connections. The file area is not letting me upload. It keeps saying file is too big and it's only 3.5mb. I posted the pic to another site. Here it is: https://ibb.co/d6FvRjb |
|
| Back to top |
|
 |
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21237
Location: Chicago, IL
|
| Posted: Sat Oct 30, 2021 10:25 am Post subject: |
|
|
I don't see any UEI style markings on that side, what does the other side look like?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 125
|
| Posted: Sat Oct 30, 2021 10:31 am Post subject: |
|
|
| The Robman wrote: | | I don't see any UEI style markings on that side, what does the other side look like? |
https://ibb.co/6YgktRQ |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 125
|
| Posted: Sat Oct 30, 2021 10:53 am Post subject: |
|
|
| The Robman wrote: | | I don't see any UEI style markings on that side, what does the other side look like? |
I can solder wires on if we have to |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21237
Location: Chicago, IL
|
| Posted: Sat Oct 30, 2021 11:54 am Post subject: |
|
|
I still don't see any tell-tale markings that would lead me to believe this is a UEI remote. Do you have a user manual, are there any UEI setup codes or UEI style programming techniques?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 573
|
| Posted: Sat Oct 30, 2021 12:20 pm Post subject: Bell Satellite 5.4 ir |
|
|
If you notice by the 6 solder joints at the bottom the circuit designation is sw1
typically i have seen this in remotes where that switch changes the remote from room a or b
or IR to RF.
If you notice the 10 solder lugs at the top of the remote designated con1 typically i have seen another circuit board soldered there either with pins or a ribbon cable.
That board is the RF section of the remote.
So my opinion is this is not a programmable JP1 remote |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 125
|
| Posted: Sat Oct 30, 2021 6:08 pm Post subject: Re: Bell Satellite 5.4 ir |
|
|
| HamburgerHelper1 wrote: | If you notice by the 6 solder joints at the bottom the circuit designation is sw1
typically i have seen this in remotes where that switch changes the remote from room a or b
or IR to RF.
If you notice the 10 solder lugs at the top of the remote designated con1 typically i have seen another circuit board soldered there either with pins or a ribbon cable.
That board is the RF section of the remote.
So my opinion is this is not a programmable JP1 remote |
yes i know what you mean. I have an RF remote like this and it looks to be exactly what you say |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
