|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Jul 11, 2020 9:51 am Post subject: RMIR learned signal display suggestion |
|
|
In the cases where a signal currently shows up as "Multiple" but in reality there's only 1 clean decode and an additional garbage entry, could we have RMIR display the clean decode? There are several examples of this in the RMIR file that Capn Trips just posted. I think this would make things easier for users.
Here's the file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26000
Also, is there a way to display the code summary in RMIR like you could in IR.exe? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Sat Jul 11, 2020 1:17 pm Post subject: |
|
|
The file at that link contains just two learned signals, neither of which have decodes, so I think you have linked to the wrong file.
Quote: | Also, is there a way to display the code summary in RMIR like you could in IR.exe? |
Have you tried File > Summary >Create Summary? If that isn't what you want, could you explain what it is that you would like? _________________ Graham |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Jul 11, 2020 2:24 pm Post subject: |
|
|
Sorry, the Capn must have overlayed his file after I posted, here's the original file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26003
And, regarding the file that you did download, I had forgotten that I had switched RMIR to use DecodeIR for the ict tests that I did, so there is something that I'd like you and Barf to look at. That file contains clean learns in the NEC2 format, and these decode correctly using DecodeIR but not with the IRTrans thingy program, any idea why?
I had never noticed that Summary option before, any chance we could have a button for it in the learned tab, like there is in IR.exe ? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Sun Jul 12, 2020 9:24 am Post subject: |
|
|
The Robman wrote: | In the cases where a signal currently shows up as "Multiple" but in reality there's only 1 clean decode and an additional garbage entry, could we have RMIR display the clean decode? There are several examples of this in the RMIR file that Capn Trips just posted. I think this would make things easier for users. |
I have now looked at the original file, and with IrpTransmogrifier as decoder, all 33 learns have no decodes. Most of them do with DecodeIR, some with multiple decodes, but the garbage entry in those multiple ones is a Gap-xx-xx-xx catch-all entry that has no equivalent in IrpTransmogrifier. DecodeIR is retained in RMIR as an optional legacy decoder and neither DecodeIR itself nor its use as a decoder in RMIR is still supported, so I do not see any reason to change its behaviour from what it has always been.
As to why the signals do not decode with IrpTransmogrifier, it seems to me that the reasons are as follows, but Bengt may need to correct me on this. There are two protocols in the signals that decode with DecodeIR. The NEC2 signals have a frequency of 41451 or 41667. The standard frequency for all NEC variants is 38400 and IrpTransmogrifier has a default tolerance of 2000, so these are outside its accepted frequency range. The NECx1 signals have a frequency of 37383, which is within tolerance, but their repeats are invalid. In IRP notation the NECx1 repeat is (8,-8,D:1,1,^108m) and these signals have D=8 so D:1 is 0. These signals send a 1 rather than 0 at that position.
Quote: | I had never noticed that Summary option before, any chance we could have a button for it in the learned tab, like there is in IR.exe ? |
The Learned tab seems a strange place for a Summary that is nothing specifically to do with learns. I could put a button on the toolbar, if I can think of a suitable icon for the button. What do you think of that alternative? _________________ Graham |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Jul 12, 2020 10:55 am Post subject: |
|
|
The code summary button in the learns tab of IR.exe just displays the codes of all the learned buttons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1415 Location: Munich, Germany |
Posted: Sun Jul 12, 2020 11:31 am Post subject: |
|
|
mathdon wrote: |
I have now looked at the original file, and with IrpTransmogrifier as decoder, all 33 learns have no decodes. Most of them do with DecodeIR, some with multiple decodes, but the garbage entry in those multiple ones is a Gap-xx-xx-xx catch-all entry that has no equivalent in IrpTransmogrifier. DecodeIR is retained in RMIR as an optional legacy decoder and neither DecodeIR itself nor its use as a decoder in RMIR is still supported, so I do not see any reason to change its behaviour from what it has always been. |
Yes, that is basically it. DecodeIR was obviously developed with the aim to decode as much as possible, also some signals that should not be decoded, "false positives".
The reason why DecodeIR was entirely removed from IrScrutinzer 2.*.* was that it requires so much cruft, cruft that needs to be maintained for "all platforms". Still, IrScrutinizer 1.4.3. is available and contains DecodeIR 2.45, and, to some extent, is supported (for this reason).
Quote: | As to why the signals do not decode with IrpTransmogrifier, it seems to me that the reasons are as follows, but Bengt may need to correct me on this. There are two protocols in the signals that decode with DecodeIR. The NEC2 signals have a frequency of 41451 or 41667. The standard frequency for all NEC variants is 38400 and IrpTransmogrifier has a default tolerance of 2000, so these are outside its accepted frequency range. The NECx1 signals have a frequency of 37383, which is within tolerance, but their repeats are invalid. In IRP notation the NECx1 repeat is (8,-8,D:1,1,^108m) and these signals have D=8 so D:1 is 0. These signals send a 1 rather than 0 at that position. |
All coincides with my observations. Let me add that the length of the captures is wildly varying, so it appears fairly random.
Quote: |
The Robman wrote: | I had never noticed that Summary option before, any chance we could have a button for it in the learned tab, like there is in IR.exe ? |
The Learned tab seems a strange place for a Summary that is nothing specifically to do with learns. I could put a button on the toolbar, if I can think of a suitable icon for the button. What do you think of that alternative? |
I like popup, "right-mouse" menus. There are a number of such in IrScrutinizer. They are easy to program, supports disabling, accelerators, mnemonics, cascaded menues, tooltip texts, and take up no screen real estate. Drawback can be that users do not find them. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Jul 12, 2020 3:17 pm Post subject: |
|
|
Barf wrote: | I like popup, "right-mouse" menus. There are a number of such in IrScrutinizer. They are easy to program, supports disabling, accelerators, mnemonics, cascaded menues, tooltip texts, and take up no screen real estate. Drawback can be that users do not find them. |
I like the idea of making them default to ON, letting the user know they exist, and telling them how to disable them. That way they know they're there in case they need to turn them on again for some reason. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Jul 12, 2020 3:19 pm Post subject: |
|
|
mathdon wrote: | As to why the signals do not decode with IrpTransmogrifier, it seems to me that the reasons are as follows, but Bengt may need to correct me on this. There are two protocols in the signals that decode with DecodeIR. The NEC2 signals have a frequency of 41451 or 41667. The standard frequency for all NEC variants is 38400 |
Sounds like they are really "Pioneer" signals, which makes sense. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1415 Location: Munich, Germany |
Posted: Wed Jul 15, 2020 2:59 pm Post subject: |
|
|
The Robman wrote: | Barf wrote: | I like popup, "right-mouse" menus. There are a number of such in IrScrutinizer. They are easy to program, supports disabling, accelerators, mnemonics, cascaded menues, tooltip texts, and take up no screen real estate. Drawback can be that users do not find them. |
I like the idea of making them default to ON, letting the user know they exist, and telling them how to disable them. .... |
Rob, I do not think you are talking about the same thing I am talking about. A popup menu is, if used, an integral usage element, and can not be "turned on and off" at will, just as little as the steering wheel of an automobile can be turned on and off. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed Jul 15, 2020 3:23 pm Post subject: |
|
|
Maybe so, I assumed you were referring to the same type of pop-up items that RMIR uses, and in most cases, I turn them off whenever possible. The most recent example is the one where RMIR wants the user to chose from 8 or more executors for simple NEC1 signals, where 99% of the time, just picking the NEC1 executor is the right think to do.
I see you we actually talking about right-click menus, which of course, would only appear if you actually right-click. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|