JP1 Remotes

[ylaviolette]

No problem, will prepare an updated ict with notes per signal. Stay tuned, thx

[The Robman]

I have figured out what was wrong with the Pronto file, you had repeated the first 2 signals, so once I deleted those, they matched up. I have decoded most of the data in the signals, the only remaining issues are:

1. I couldn't find the Follow Me code
2. There are 2 bits that change for Power, I don't know if one of them is really something else.
3. Bits 13-20 are zero for all the signals except for the OFF signal from the first batch, which is odd.
4. I can't nail down the checksum. It's obviously a SUM of something, reading the data as LSB, because it increments with the TEMP as it changes, but I can't find a formula that works for all of the signals.
5. There were several incomplete signals (like 16c from the first batch, and 4 near the end of the second batch, but I think I was able to figure out all the missing data for those.

Here are my findings:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26060

I haven't tried writing an executor for it yet as I'd really like to have the executor calculate the checksum, but I haven't decided how best to handle the odd number of bits (67 bits is a very strange number for an IR signal).
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[The Robman]

I have created an upgrade for the Keeprite:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26067
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[The Robman]

Here's an updated version that uses 1 less byte of variable data and calculates the checksum.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26069

It requires the following to be added to protocols.ini first: