View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Feb 28, 2020 9:33 am Post subject: |
|
|
Your first priority should be to test the RMIR file I created, because if there are IR versions of all those buttons, that's how we'll find them. The learns that I posted where only for if the search comes up empty, so you don't need to worry about them yet. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Fri Feb 28, 2020 11:12 pm Post subject: |
|
|
ok, so I have to use the RMIR you posted and test all buttons in each decice on the remote to see what they do? where did you put the buttons that cause problems now? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Feb 29, 2020 9:15 am Post subject: |
|
|
tajvdz wrote: | ok, so I have to use the RMIR you posted and test all buttons in each device on the remote to see what they do? |
Yes, I created about 5 (I think) new upgrades that use the same protocol as the main upgrade, but the buttons use all the button codes that haven't been used yet. If you find a button that does something, try it again to double check what it does, then report back here, something like:
test3, rewind button = GUIDE
tajvdz wrote: | where did you put the buttons that cause problems now? |
Huh? Which buttons cause problems? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Sat Feb 29, 2020 4:10 pm Post subject: |
|
|
The Robman wrote: | Huh? Which buttons cause problems? |
The buttons I mentioned last week that are Rf only and where I created macros for. On the Original remote they work much better, especially DVR. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Feb 29, 2020 5:04 pm Post subject: |
|
|
That's what this test is for, to see if you can find them. Do you get the concept of what we're doing here? Your device uses remote signals that have a protocol and device codes, then each button uses an OBC (original button code). Each typical remote signal supports up to 256 possible OBCs. What I did was take all the OBCs from 0 thru 255, then remove the ones where we know what they do, which just leaves the rest. Then I programmed them into 5 separate upgrades and loaded them into an RMIR file. You should now load this RMIR file into your remote and test each button in front of your device, making a note of each button that does something. It would be super cool if we find IR versions of some of the buttons that everyone thinks are RF only.
And even if we don't, I might be able to magic up some "combo" learned signals which replicate them, if there are macro equivalents. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Sat Feb 29, 2020 6:35 pm Post subject: |
|
|
I tested all 5 but only one button worked:
test1, 0 = 0
That was all... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Feb 29, 2020 8:48 pm Post subject: |
|
|
That's disappointing, so I guess those functions really are RF only.
So, can any of the other RF only functions be re-created by 2 button presses, like GUIDE can?
Ok, so now to try those learns that I generated for you. I have copy/pasted them into an RMIR file for you. There are 3 learns, on the SOFT1-3 buttons under dev1. See if any of them invoke the GUIDE function.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25867 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Sun Mar 01, 2020 10:14 am Post subject: |
|
|
There is no Dev1 present on the remote. If I look into the Rmir there is also no device on the General tab. On the Learned Signals tab I see Guide 1, Guide 2 and Guide 3. How can I use them? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Mar 01, 2020 10:23 am Post subject: |
|
|
I'm not an expert with the Xsights, and I did wonder about that myself. Maybe if you add any upgrade to the RMIR file that will establish a new device button, then re-assign the 3 learns to that device mode? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Mar 01, 2020 10:51 am Post subject: |
|
|
I just added the Ziggo back as an upgrade, so hopefully the 3 soft buttons will be active now _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Sun Mar 01, 2020 10:56 am Post subject: |
|
|
the download is a mdu file now. I don't know how to add this to thev rmir file.[ so better is to give me a file that is ready to upload right away.. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Mar 01, 2020 11:20 am Post subject: |
|
|
Sorry, I grabbed the wrong file, try now _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Sun Mar 01, 2020 8:22 pm Post subject: |
|
|
I tried this one. All 3 buttons do the`same. They only do the menu function. The macro i made is menu followed by ok. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sun Mar 01, 2020 10:35 pm Post subject: |
|
|
these learns are supposed to be MENU followed by OK, it sounds like I need to build more dead time in between the two halves.
Btw, #2 and 3 are repeating, which means if you hold them down, they'll keep sending OK.
Here's a new test file with another attempt, if this one doesn't do anything, it's probably not worth doing much more with this learn approach.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25867 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tajvdz
Joined: 09 Feb 2020 Posts: 58
|
Posted: Mon Mar 02, 2020 4:14 pm Post subject: |
|
|
I used the test2 file again and indeed if I keep the soft button pressed it works. From test2 I think button 2 works the best. button 3 doesn't work all the time. test3 with button 4 the same as button 3 but i think it works a bit less. Overall my macro for Guide gives a better result. DVR also works but the menu is a bit slow sometimes so with the macro the menu hasn't loaded when the next function comes. I still think it is a shame that they made these buttons RF only… |
|
Back to top |
|
|
|