JP1 Remotes

[The Robman]

Can you estimate how long the signal is on for with the 15 value? Is it like 2 or 3 seconds?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[HamburgerHelper1]

I'm an old geek my watch has stopwatch lol
2.3 seconds

[HamburgerHelper1]

Make that 2.3 sec +/- 0.2 sec for my old fingers to push the buttons

[The Robman]

In case you're interested in the methodology that I used to create this upgrade, I basically modeled it after the code used in the "Zenith Pause Trick". Somewhere along the line, we discovered that if you press the RECORD button using the VCR/0039 setup code, the button would stay on for a long time, so we used this to create delays in macros. And what the Zenith (PID 0022) executor does is load hex 15 into R0D when the button pressed is RECORD.

I entered decimal 15 in your upgrade, which is a bit shorter than hex 15 (decimal 21) but it's the same idea.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[HamburgerHelper1]

Yes i thought i read something about that awhile back
i also downloaded your 5a-commented and other NEC info you have on here

Now that i have played with it here is the situation
The tv when hold the normal vol - or + it jumps one notch pauses
then continiues after this pause
so your helper works but lets say i start out at vol 20
after a few pushes of vol- and vol + the vol will no longer return to 20
it might be lower or higher due to this pause
It is not your helper's fault but the way the tv has this built in pause
I don't want you to goto anymore work
Just wondering if you have any simple ideas maybe a macro to conteract this pause I tryed a macro of mute,vol- and it helps a little

[HamburgerHelper1]

Recent purchase of int-422 addded jp1.3 extender v 3.05 to use lkp
It works great for mute just wondering if i did this right or if there is a more efficiant way of doing it.
Hoping The Robman can have a look. I definately like the work you did on the Samsung Helper file
Here is the link to current RMIR

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25865

[The Robman]

So...

• TV/2000 is the helper upgrade
  
• A/Phantom1 is a keymove for VOL- from TV/2000
  
• A/Shift-Phantom1 is a keymove for VOL+ from TV/2000

But I don't see these two Phantom keymoves used in any macros, so I can't see how you're using them?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[HamburgerHelper1]

if you look at special functions i am using mute LKP for the helper

[The Robman]

Ah, I see it now. One quick change I would recommend is to add the shifted phantom1 rather than doing a 2-step macro of setup and phantom.

Another option, rather than using LKP, would be to setup a toadtog so that each press of MUTE would alternate between phantom1 and shift-phantom1.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[HamburgerHelper1]

Thanks for the input
I never thought about toadtog
I will have to play with it and see which way i prefer

[The Robman]

Try this...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25866
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[HamburgerHelper1]

works great
I'll use it for a few days and see if i like it that way

[The Robman]

[HamburgerHelper1]

an interesting idea
so far i has worked well enough not to have to fine tune it
so i will use it for a few days 1st and see what i think
thank for all your help