JP1 Remotes

Posted: **Thu Jun 20, 2019 5:29 am**

I have a chance to get an old RS 15-100 and i see that it also has an extender.
Just wanted to know if there is any known problems/complications with
this remote. Seems like it would be nice with the extender since it has
LDKP I could definately make use of that
Anyone have any experience with this remote

Posted: **Thu Jun 20, 2019 5:45 am**

I believe the RS 15-100 requires hardware modification to support JP1. See http://www.hifi-remote.com/forums/dload ... le_id=5127 and http://www.hifi-remote.com/forums/dload ... le_id=6262

Posted: **Thu Jun 20, 2019 6:41 am**

I knew i had to do some soldering and i have the skills to do it
so i am still undecided but i will probably pass on it

Posted: **Thu Jun 20, 2019 7:10 am**

Here is the link to the remote in case someone else would be interested in it
It is the Ebay store of the recycyling company i work for
even though i work in a different department and have not looked at it yet

https://www.ebay.com/itm/RadioShack-15- ... Sw0-Ba10gD

Posted: **Thu Jun 20, 2019 1:18 pm**

Yeah, the only problem with the 15-100, which is unique to this one remote, is that even though it has pads for a 6-pin, there's no opening in the casing for it. Some folks (mostly Tommy) came up with various hardware mods to try and fashion a usable 6-pin connector for it. All I did was solder thin wires to the pads with a 6-pin hanging loose at the bottom of the remote, but I never intended to use mine as a remote, I just bought it for the hacking effort.