View previous topic :: View next topic |
Author |
Message |
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Sun Apr 21, 2019 10:09 am Post subject: program nvidia shield RC to Nevo C2 |
|
|
Can the Nvidia Shield remote be programmed to the Nevo C2? Thinking about upgrading to the shield but want to use my Nevo C2; thanks. _________________ Radunn |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sun Apr 21, 2019 3:27 pm Post subject: |
|
|
Depends on the model. Some lack IR. But a plug-in USB IR dongle will solve that. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Sun Apr 21, 2019 4:55 pm Post subject: |
|
|
mdavej wrote: | Depends on the model. Some lack IR. But a plug-in USB IR dongle will solve that. | Is the USB dongle the go between (literally) the shield and the nevo c2? How does it work? _________________ Radunn |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Sun Apr 21, 2019 9:06 pm Post subject: |
|
|
The USB dongle plugs into the USB slot of the Shield and as far as the Shield is concerned, it acts just like a USB keyboard. Any remote can send IR to the dongle. The dongle is trained one time to emulate specific keys when it receives different IR commands.
Older models of the Shield received IR with nothing added. Newer models require a dongle. There are multiple brands, but here is one that I have experience with: https://flirc.tv/more/flirc-usb
EDIT: I should have mentioned: If you have a USB keyboard, either wired or wireless, you can check out what a remote can do for you. Connect the wire, or USB receiver for the keyboard to the USB slot of the Shield. Read the instructions for operating the Shield and try the keys on the keyboard. If you can do what you want with the keyboard, then you can program the FLIRC to send the same keys when it receives IR commands you teach it. The teaching process requires you to plug the FLIRC into your PC. After you have trained the FLIRC, the PC is no longer needed. Pllug the FLIRC into the Shield and you can now command the Shield from your remote. |
|
Back to top |
|
|
xnappo Expert
Joined: 30 Dec 2003 Posts: 861
|
Posted: Mon Apr 22, 2019 2:10 pm Post subject: |
|
|
I will also just mention that the HDMI-CEC on the Shield actually works pretty well. You may just be able to turn on HDMI-CEC and use your TV or Receiver to pass commands through.
I am actually now off IR completely and using my Shield + RF remotes with HDMI-CEC to control everything. Of course 'everything' is now a lot smaller group of devices than 5 years ago - just the Shield, Receiver, and TV/projector. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Tue Apr 23, 2019 1:14 pm Post subject: |
|
|
Will file work for the Nevo C2? Perhaps I'm missing vital information..... thanks _________________ Radunn |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Tue Apr 23, 2019 2:52 pm Post subject: |
|
|
Yes, the file will cause the Nevo C2 to be able to send commands for the Nvidia Shield. The problem is - if your Shield is a recent model it will not receive commands from the Nevo or any other universal remote. That is the issue being addressed by all of our other responses. It can be made to work, with some effort. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Tue Apr 23, 2019 3:04 pm Post subject: |
|
|
pH7_jp1 wrote: | Yes, the file will cause the Nevo C2 to be able to send commands for the Nvidia Shield. The problem is - if your Shield is a recent model it will not receive commands from the Nevo or any other universal remote. That is the issue being addressed by all of our other responses. It can be made to work, with some effort. | I don't have the Nvidia yet; plan on buying it. What model should I get that will work; thanks.... _________________ Radunn |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Tue Apr 23, 2019 3:07 pm Post subject: |
|
|
Any that you buy new (not used) will need a dongle to work. |
|
Back to top |
|
|
radunn1955 Guest
|
Posted: Sun Oct 20, 2019 4:51 pm Post subject: programming TK628 (Linkstyle, Wokei) to Nevo C2 |
|
|
Just purchased TK628 (Linkstyle, Wokei) airfly remote to control my nvidia shield 2017. It does a great job. I have a Nevo C2 RC that I would like learn the new remote to but am unable to do so at this time. Instructions are not too clear but supposedly it is a learning remote.
Any and all help is appreciated.! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Sun Oct 20, 2019 5:29 pm Post subject: |
|
|
I tried searching for the answer, but I can't tell whether the Nvidia is controlled using IR or RF signals. If it's IR, you should be able to learn the signals using your Nevo, but if it's RF you won't be able to.
There is an upgrade in the file section for the Nvidia Shield:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14747 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Oct 21, 2019 12:52 pm Post subject: |
|
|
Best I can tell, the remote in question is essentially a wireless HID keyboard/mouse similar to a Logitech. It uses it's own proprietary RF to communicate with its own USB dongle. Radunn must have plugged the USB dongle into his Shield and is using the remote as a keyboard/mouse. So there is no IR to be learned.
Since the 2017 Shield has no IR receiver at all, the Nevo would require the addition of an IR dongle like the FLIRC mentioned above. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Mon Oct 21, 2019 5:01 pm Post subject: Program TK628 (aka Linkstyle, Wokei) remote to Nevo C2 |
|
|
I have the TK620 remote but am unsuccessful programming it to the Nevo C2. It controls the Nvidia Shield box (2017) therefore I want program it to the Nevo C2. All attempts to program it resulted with 'key not learned.'
Any and all help is appreciated; in advance thanks! _________________ Radunn |
|
Back to top |
|
|
xnappo Expert
Joined: 30 Dec 2003 Posts: 861
|
Posted: Tue Oct 22, 2019 9:34 am Post subject: |
|
|
Another alternative is HDMI-CEC - the Shield does not use many buttons, and is one of the few devices that I find HDMI-CEC works well with. You need to turn on HDMI-CEC on both your TV and Shield, then you can use the IR receiver on the TV to control the Shield. |
|
Back to top |
|
|
|