JP1 Remotes

Insignia NS-39DF510NA19 Fire TV Edition with discrete power/inputs and digits:
http://www.hifi-remote.com/forums/dload ... e_id=25550
Also should apply to 24" NS-24DF310NA19 and 32" NS-32DF310NA19 models.

Same upgrade works on 43" NS-43DF710NA19 , 50" NS-50DF710NA19 and 55" NS-55DF710NA19 models except for discretes and digits.

I thought this unusual upgrade was worthy of a post. The included remote is nearly identical to a Fire TV remote. And like a Fire TV remote, is bluetooth only, EXCEPT for one lone IR function - Power.

This gave me hope that other IR functions might exist. I tried all other posted Insignia TV upgrades, but none worked. So I did a brute force code search for every OBC for NEC1 2.125, which I got from the Power function.

I was able to find every function on the original remote plus one additional function - Search.

EDIT: Looks like this also works for Toshiba Fire TV and possibly others.

Also was able to get discrete power and input codes and digits from the Harmony database.

Since Toshiba fire tv uses the same remote, is it close to being Toshiba tv code set?

Glad you asked. The Toshiba codes are different than mine, BUT they work fine on the Insignia too. And the Harmony database had some discrete power and input codes I was missing. So I'm going to change my upgrade to match the Toshiba and rename it.

Are there any other Fire TV brands that might also share these codes?

Those are only brands I know of, what about mce commands the fire console and stick respond to once they have iR sensor attached? Devices have been known to respond to different code sets at the same time.

Thanks. My Inteset IReTV IR receiver that uses Xbox 360 MCE codes does not respond at all to these commands.

Edmund, do you have one of these TVs? I just added one command that was not in the Harmony database, the Dash separator command. Very useful when using the built in tuner.

I ended up using NEC 4 Dev Combo since most of the commands are device 64 except for the app launch ones which are 2.125.

My upgrade has the following which are on the original remote: ... plus these additional ones:

I don't, my landlord had it for month before returning it, didn't care for it as a gaming monitor.

Since this thread started they also have Element and Westinghouse brands of Fire Tvs, REAL tvs.

Dave, say someone with a fire tv and plugged a roku in to say get access to vudu, you think their roku remote would know the power and volume commands from this tv? Is the code set so new it wouldn't possible know it?

Good question. Even if it doesn’t have the codes, I think the Roku remote may still be able to control via CEC. I forget exactly how it works. But the problem can be avoided entirely by side loading Vudu on the Fire TV. I’ve loaded it on mine with no problems.

This thread I answered at roku community:

https://community.roku.com/t5/Getting-S ... 5719#M1908

Got me thinking about roku remote having troubles controlling Fire TV's.

I added a new command I call "Popup Menu" that you could only get to with a long press of Home before. This is a shortcut to that menu that's very handy for changing inputs on Insignia TVs with no discrete input commands.

Dave did you see the new Fire tv remote they're selling that will work with older models?

https://www.amazon.com/Replacement-Remo ... JX4ZS2DHKY

Maybe you search for the new commands.

Thanks for the head's up, Edmund. I did another pass and found 2 of the 3 new functions on that remote:
- Settings (Gear icon function that I called "Popup Menu" in my previous post)
- Recents (stacked paper icon that momentarily shows recent list)
- Hulu (didn't find that one)

I actually found the Recents function before but didn't understand what it was doing, so I ignored it. After your post and reading a recent model Toshiba manual that describes all the new remote functions, I made the connection. "Recents" actually does different things according to the context. If you're watching live TV, it pops up a row of recent channels. If you're not in live TV, it shows a row of recent apps and sometimes titles within those apps, like in the case of Prime Video, you get the title.

"Settings" pops up the same settings menu on a short press that you get with a long press of "Home".

I thought for sure "Hulu" would be in there somewhere. But I did several passes and still came up empty. If you ever run across it in the Harmony database or something, post back.

The channel buttons still don't function on 43" and up Insignias. They only work on Insignias under 43" and on Toshiba (possibly other brands as well).

I'll update the file soon.

Here's what the new remote looks like. The TV set icon shows the channel guide.

I don’t see the link to download the fiLE

I went to here.

http://www.hifi-remote.com/forums/dload ... e_id=25550

I tried Edge, Firefox and IE11
What am I doing wrong ?
I have a NS-39DF310NA21 coming tomorrow (Firday)

oops
I tried again and was able to download
???