unbranded DVD remote

[The Robman]

split from: https://www.hifi-remote.com/forums/viewt ... p?t=101274

But now I encounter the problem of programming the remote for the right devices, which are as follows:

The second one is an unbranded DVD remote I found around left by the previous occupants of the apartment. I used it to "teach" a Raspberry Pi, and generate a lirc config file that looks like this:

begin remote

Code: Select all

  name  lircd.conf
  flags RAW_CODES|CONST_LENGTH
  eps            30
  aeps          100

  gap          107928

      begin raw_codes

          name 1
             9038    4450     604     528     603     532
              577     554     578     529     600    1666
              605     528     581     526     583     550
              581    1659     580     553     578    1662
              577    1663     598     535     574    1666
              606    1660     601    1639     579     554
              576     530     601    1666     605    1635
              584    1656     605     528     581    1659
              602     530     579    1661     600    1667
              604     502     607     526     584     550
              580    1659     602     531     578    1663
              608

  ...

Can I use this somehow to directly program the URC-6440, or find out which device this unknown remote matches? I'd rather not have go through the learning procedure.

I'd appreciate any help and advice.

[The Robman]

In this case, you didn't post enough of the LIRC code for us to be able to do anything.

[Jellby]

Yeah. I didn't expect a full conversion, but some hints on how to do it myself. The IrScrutinizer clue was good enough, so I could convert the full LIRC code.

If you are curious, the full conversion is here. Is this a known device? How to find out?

[vickyg2003]

If you are curious, the full conversion is here. Is this a known device? How to find out?

I'm not sure what you mean by Known Device, but there are some other DVD players that use Nec1 16 device 237

The easy way to find this out is to get 3FG's JP1-master spread sheet.

The 1.15 version is here
https://www.hifi-remote.com/forums/dload ... e_id=14415

He put his spreadsheets here
File Section -> JP1 File Section -> Device Upgrades ->