 |
JP1 Remotes
|
| View previous topic :: View next topic |
| Author |
Message |
jackching
Joined: 27 Feb 2018
Posts: 153
|
 Posted: Thu Mar 08, 2018 6:12 pm Post subject: Hisense 65R6107 HDTV television (with Ruko) |
 |
|
Split from:
http://www.hifi-remote.com/forums/viewtopic.php?t=101169
| mdavej wrote: | It was back when they had the wrong picture and what I assumed was the wrong cable before we got them to fix the listing. Looks like we can stick with chip partner then.
I just tried another cable from ezcar_II and it doesn't work with our remotes either. So that's another one to avoid.
Jack, get the chip_partner cable Rob linked above. There's plenty we can do without a cable. Tell us the make and model of your device and we can probably give you codes you can manually enter. |
My device again is 3147. I would like codes for the hisense 65r6107 with roku. just more or less want direct hdmi port selection |
|
| Back to top |
|
 |
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21456
Location: Chicago, IL
|
| Posted: Fri Mar 09, 2018 1:42 pm Post subject: |
|
|
| jackching wrote: | | mdavej wrote: | | There's plenty we can do without a cable. Tell us the make and model of your device and we can probably give you codes you can manually enter. |
My device again is 3147. I would like codes for the hisense 65r6107 with roku. just more or less want direct hdmi port selection |
3147 is the signature of your JP1 remote, the "device" in question is your Hisense 65R6107 HDTV television (with Ruko).
Unfortunately, the only Hisense devices that we have in the file section are a couple of STBs, and each of them uses different codes. Have you found a built-in setup code that works this TV? If so, what is it?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Fri Mar 09, 2018 2:16 pm Post subject: |
|
|
| The Robman wrote: | | Unfortunately, the only Hisense devices that we have in the file section are a couple of STBs, and each of them uses different codes. Have you found a built-in setup code that works this TV? If so, what is it? |
I'm pretty sure 10748 used to work with one hdmi input, but since i cleared my remote to factory, that code dont seem to work anymore |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21456
Location: Chicago, IL
|
| Posted: Fri Mar 09, 2018 5:44 pm Post subject: |
|
|
Is TV/10748 the setup code that you programmed into the remote to work your TV, and if so, does it work most of the regular functions, like VOL+, CH+, etc?
If so, that setup code uses the Aiwa protocol with a device code of 284 (aka dev 28, sub-device 1). We have 2 update files that use that setup, but neither of them includes any discrete HMDI input codes.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10838
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=890
Are you saying that, after the factory reset, the TV/10748 code no longer works, or that it no longer includes the HMDI input? If the 10748 code is no longer accepted, that means the factory reset deleted it and you'll need to use JP1 to add something similar back, and even then you'll have to do some experimenting to find the HDMI codes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Fri Mar 09, 2018 6:12 pm Post subject: |
|
|
| The Robman wrote: | Is TV/10748 the setup code that you programmed into the remote to work your TV, and if so, does it work most of the regular functions, like VOL+, CH+, etc?
If so, that setup code uses the Aiwa protocol with a device code of 284 (aka dev 28, sub-device 1). We have 2 update files that use that setup, but neither of them includes any discrete HMDI input codes.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10838
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=890
Are you saying that, after the factory reset, the TV/10748 code no longer works, or that it no longer includes the HMDI input? If the 10748 code is no longer accepted, that means the factory reset deleted it and you'll need to use JP1 to add something similar back, and even then you'll have to do some experimenting to find the HDMI codes. |
It no longer works at all. Maybe ill have to order a different jp1 cord |
|
| Back to top |
|
|
binky123
Expert
Joined: 14 Feb 2004
Posts: 1292
|
| Posted: Fri Mar 09, 2018 7:15 pm Post subject: |
|
|
| The code 10748 or TV/0748 is a built-in setup code so it shouldn't be deleted on a factory reset. Perhaps it just needs to be assigned again to the TV button? |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21456
Location: Chicago, IL
|
| Posted: Sun Apr 15, 2018 11:10 am Post subject: |
|
|
Jack, did you give up on this or did you get everything working, and if so, how?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Mon Apr 16, 2018 6:45 pm Post subject: |
|
|
| The Robman wrote: | | Jack, did you give up on this or did you get everything working, and if so, how? |
I half gave up on it. My new cable just came in today from china. Might start playing with it when i build up some courage. Anything new? |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21456
Location: Chicago, IL
|
| Posted: Mon Apr 16, 2018 9:26 pm Post subject: |
|
|
Nothing new here, we haven't been working on this in your absence. I was just going through the various posts in the code search forum to see which ones were left un-resolved.
If you want more help, we'll need a recap of where things stand.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Tue Apr 17, 2018 8:32 pm Post subject: |
|
|
| The Robman wrote: | Nothing new here, we haven't been working on this in your absence. I was just going through the various posts in the code search forum to see which ones were left un-resolved.
If you want more help, we'll need a recap of where things stand. |
Ok i got the new cord and it reads my remote fine. Only problem now is that there are no discrete codes for hdmi. I know for a fact though that i hit discrete codes for hdmi 3 and hdmi 4 when i was trying different codes before i got the cord. I didnt record them though  |
|
| Back to top |
|
|
MrMoody
Joined: 27 Jan 2010
Posts: 189
Location: NC,USA
|
| Posted: Tue Apr 17, 2018 8:56 pm Post subject: |
|
|
I just uploaded two HiSense upgrades. One is an upgrade for a HiSense 40". I'm pretty sure I got from a remote at WalMart about 3 years ago, not sure why I never uploaded it. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25184 NEC1 device 4, very common, code TV-0178 is one.
The other I just created from learning a competing brand universal remote upgraded from their database, for a HiSense Roku TV, Roku protocol device 234.199, not built into UEI remotes at all to my knowledge. This one has your HDMI discretes. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25185
It wouldn't surprise me too much if both upgrades actually operate the TV; I've seen this in other devices.
Let us know what you find.
_________________
URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Tue Apr 17, 2018 9:37 pm Post subject: |
|
|
| MrMoody wrote: | I just uploaded two HiSense upgrades. One is an upgrade for a HiSense 40". I'm pretty sure I got from a remote at WalMart about 3 years ago, not sure why I never uploaded it. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25184 NEC1 device 4, very common, code TV-0178 is one.
The other I just created from learning a competing brand universal remote upgraded from their database, for a HiSense Roku TV, Roku protocol device 234.199, not built into UEI remotes at all to my knowledge. This one has your HDMI discretes. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25185
It wouldn't surprise me too much if both upgrades actually operate the TV; I've seen this in other devices.
Let us know what you find. |
Ill let you know tomorrow. I have some reading to do as i even forget how to apply the upgrade. Rmir kept freezing up and crashing as i was playing with it |
|
| Back to top |
|
|
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4583
|
| Posted: Wed Apr 18, 2018 12:48 am Post subject: |
|
|
Glad to hear the cable is working. I've found RMIR is much more stable if you pick the comm port and turn off auto detect.
Last edited by mdavej on Wed Apr 18, 2018 7:42 am; edited 1 time in total |
|
| Back to top |
|
|
jackching
Joined: 27 Feb 2018
Posts: 153
|
| Posted: Wed Apr 18, 2018 7:14 am Post subject: |
|
|
| MrMoody wrote: | I just uploaded two HiSense upgrades. One is an upgrade for a HiSense 40". I'm pretty sure I got from a remote at WalMart about 3 years ago, not sure why I never uploaded it. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25184 NEC1 device 4, very common, code TV-0178 is one.
The other I just created from learning a competing brand universal remote upgraded from their database, for a HiSense Roku TV, Roku protocol device 234.199, not built into UEI remotes at all to my knowledge. This one has your HDMI discretes. http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25185
It wouldn't surprise me too much if both upgrades actually operate the TV; I've seen this in other devices.
Let us know what you find. |
The discretes worked for all of the hdmi inputs. Thanks a million! I suppose you guys want my codes now for my edifier speakers eh? lol |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21456
Location: Chicago, IL
|
| Posted: Wed Apr 18, 2018 7:31 am Post subject: |
|
|
| jackching wrote: | | The discretes worked for all of the hdmi inputs. Thanks a million! I suppose you guys want my codes now for my edifier speakers eh? lol |
Did both upgrade files work, meaning that your set does respond to 2 different code sets? And yeah, if you have any other devices that we don't have, please load the codes, thanks!
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
