Page 1 of 2
Thorstream Elite media player
Posted: Sun Jan 14, 2018 1:55 am
by foxracin1979
I've read and tried installing about everything i could think of to make a custom remote and bin file for the Thorstream Elite Media Player! I do have the same media payer downloaded and working perfect on my Harmony 650 Any help would be more than appreciated! im pretty positive i have the control commands in a file on the media player its self but Fried my brain trying to get the Remote Master software to open correct Many Thanks in advance and im attempting this for the sling box 350 with IR Blaster
Shawn
Posted: Sun Jan 14, 2018 3:28 am
by alanrichey
PM me your login details for the Harmony software (MyHarmony of the standalone 7.7 ?) and I can install it on my 650 and build you a BIN file.
Posted: Sun Jan 14, 2018 5:29 am
by alanrichey
Works great man!!
Posted: Sun Jan 14, 2018 12:31 pm
by foxracin1979
Thank you! I'm a fairly tech savvy and I worked for days trying to get this and follow everything step by step
Thank you
Posted: Mon Jan 15, 2018 3:03 am
by alanrichey
Did it control your device OK ?
Posted: Mon Jan 15, 2018 4:26 am
by foxracin1979
It controls my device yes.. The only 2 issues I've found are the ok button to select on something doesn't work but I can select by pressing the guide button! I was actually just trying to configure the custom Remote 8 listed in the How to replace remote with a generic customizable image! That remote is very close to the factory remote for my Thorstream! If there's a way to upload or send a picture of my original, the Button placement would work perfectly. Also I'm not able to use any navigational on my PHONE at all..
Posted: Mon Jan 15, 2018 4:39 am
by alanrichey
OK. Getting a correct image can really be done ONLY if Sling have produced the image, otherwise it is a huge amount of work. And I can't explain the phone, the BIN file is stored in the Slingbox so if the arrow buttons work on one device they should work on all devices.
Posted: Mon Jan 15, 2018 4:57 am
by foxracin1979
Now that the Bin has been created, is it alot of work to set up the generic customizable one on placeshiftingenthusiasts.com/customising-the-remote-image-on-your-slingplayer/
If its alot of work then I completely understand and I'm able to work with what you've already setup.. and even being I think with a few missing links to the puzzle I may be able to create this one but your the expert so I more than value your opinions
Posted: Mon Jan 15, 2018 5:06 am
by alanrichey
Sorry, not sure what you mean. Can you be a bit more specific ?
Posted: Mon Jan 15, 2018 5:13 am
by foxracin1979
Sure. I'm referring to the remote and section on this link
placeshiftingenthusiasts.com/customising-the-remote-image-on-your-slingplayer/
There's a very similar Remote that even has the custom buttons on the control. Also says that the writing on the buttons are also customizable.. Is that true and how difficult would that be?
Posted: Mon Jan 15, 2018 5:47 am
by alanrichey
It's all covered in the instructions. Have you not read them ?
Posted: Mon Jan 15, 2018 6:10 am
by foxracin1979
Yes sir I sure have..and I am going to attempt to configure it but I have the Bin file of the one you programmed but I do not have all the codes for the new button commands but I believe with enough research I will accomplish it
Posted: Mon Jan 15, 2018 6:21 am
by alanrichey
Let me know if you run into trouble.
Posted: Mon Jan 15, 2018 6:23 am
by foxracin1979
Thank you! Greatly appreciated
Posted: Mon Jan 15, 2018 11:20 am
by The Robman
foxracin1979 wrote:It controls my device yes.. but the ok button to select on something doesn't work but I can select by pressing the guide button!
If you want the GUIDE function copied to the OK button, we can do that.