Page 1 of 2
COSHIP N5266C-L
Posted: Tue Oct 24, 2017 9:21 pm
by pquinone
Hi Folks,
Could anybody please help me get the .bin code for the Cable Box COSHIP N5266C-L?
I have a Slingbox Solo with IR Blaster and I couldn't get a code for it.
Any help woould be absolutelly appreciated!
Pablo
Posted: Wed Oct 25, 2017 10:17 am
by alanrichey
Have you already tried the existing remotes in the File section ?
Posted: Wed Oct 25, 2017 6:59 pm
by pquinone
Hi. Thank you for your reply!
Yes, I have tried the C2010_PL and RV as well as the V2010_PL and RV without success
P
Posted: Wed Oct 25, 2017 7:20 pm
by The Robman
Those names are meaningless to us as most bin files have names like that, we would need links to the files that you tried to know which ones they are.
Furthermore, most of those files come with instructions that have a list of questions that we'd like the answers to in order to help you. "It didn't work" type answers don't get us anywhere.
Posted: Wed Oct 25, 2017 7:52 pm
by pquinone
I apologize for the missing info.
The ones I tried were:
COSHIP N6750C & N8750C from:
https://www.hifi-remote.com/forums/dload ... e_id=11155
and the COSHIP N8760C from:
https://www.hifi-remote.com/forums/dload ... e_id=11202
I followed the instructions and tested them on the Slingbox Remote Control Set-up section. I also tried several other COSHIP codes from the slingbox database but none of them worked. I am sure the IR blast of my SOLO works fine.
Posted: Wed Oct 25, 2017 8:38 pm
by alanrichey
OK. I'm afraid I am on a month-long vacation so can't do anything quickly. I'm back home mid-Nov.
Posted: Wed Oct 25, 2017 8:50 pm
by pquinone
Thanks again for your swift reply. I will wait if you don;t mind helping me out upon your return.
Enjoy your holidays!
Posted: Wed Oct 25, 2017 9:13 pm
by The Robman
Sorry to say Pablo, but Alan's not going to be able to help you any further, until you answer the 12 questions that he has asked in the instructions:
http://placeshiftingenthusiasts.com/how ... -slingbox/
I know for a fact that he's been through this too many times with folks who just won't comply.
Posted: Thu Oct 26, 2017 9:46 pm
by pquinone
Hi Rob,
Thanks for your advise. I believe I already answered the critical questions and Alan may work on the code upon his return from vacation. Nevertheless, I will list my response for all 12 questions below.
1. Slingbox SOLO (Firmware 2.1.270 / Hardware: 1.34.1)
2. No errors when adding the Codes. I was able to see and test the remote. None of the buttons worked.
3. Yes. Plenty of time and tried several times at intervals and multiple buttons.
4. Yes, tried both BIN files
5. No, none of the buttons worked. I have tried other codes form the slingbox database and the 'mute' key worked fo some.
6. Yes, I tested the IR Blaster as instructed. I also have a Slingbox PRO-HD (Firmware 2.1.420 / Hardware 1.1.0) which also have an external IR Blaster and works fine with another cable box model. I tried the SOLO with this IR blaster well with no success while the SOLO's worked fine with the PRO-HD. In conclusion, the IR blaster from the SOLO is not broken.
7. I have placed the IR blaster in different positions with no success.
8. Yes, the Cable box works perfectly with it own remote.
9. The cable box settings are okay. In fact, the same SOLO was working fine with a DirecTV receiver I previously had for which slingbox had a code available. I just cound't find any code available for my new cable box.
10. It does not support multiple remote addresses
11. Yes, i have reset it several times and followed all the steps to the point of adding / testing the codes.
12. No, I dont have access to a Logitech Harmony Universal Remote.
I hpoe this helps.
Thanks again.
Pablo
Posted: Thu Oct 26, 2017 10:17 pm
by The Robman
Thank you, I believe that will help him help you when he returns.
Everybody always feels that they have supplied enough info without answering the questions and it is a constant source of frustration here. I equate it to you calling your car mechanic asking how much to fix your car, and he asks what's wrong with it, and you say "it doesn't work".
Posted: Fri Oct 27, 2017 9:55 am
by pquinone
I totally agree Rob.
I am happy to provide any further info you guys need.
Pablo
Posted: Thu Nov 16, 2017 6:53 am
by alanrichey
Posted: Thu Nov 16, 2017 2:40 pm
by pquinone
Thank you! I'll try it and let you know

Pablo
Posted: Sat Nov 18, 2017 7:25 am
by pquinone
Hi folks. I have not been able to test it yet. As soon as I do it I will get back to you with feedback!
Posted: Sat Nov 18, 2017 7:34 am
by alanrichey
You do know you don't have to be at the Slingbox location to install it do you ? It can be done from anywhere.