|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
mdavej Expert
Joined: 08 Oct 2003 Posts: 4580
|
Posted: Wed Aug 30, 2017 5:36 pm Post subject: |
|
|
Not a problem. You can learn to any button, not just the screen ones. And you can learn to any arbitrary device, doesn't have to be MCE.
So in RMIR or on the remote make a couple of new devices, type and brand does not matter since our learns will overwrite all existing functions. You should be able to get about 70 commands per device (~40 buttons + ~30 on screen - 6 per page x 5 pages). So you'll need just 2 or 3 devices to get all 152 logitech functions. Or just do small batches and save the resulting file for each batch and overwrite the same buttons with new learns on the next batch.
Remember, you can skip all the known functions posted above.
If it's too much, I'll try to load up my logitech and do the same. Post back if you have any trouble. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4580
|
Posted: Wed Aug 30, 2017 6:47 pm Post subject: |
|
|
Ok, I dug out a Harmony and loaded up that device. I can capture all the commands and will post them soon. So just hang tight. |
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
Posted: Wed Aug 30, 2017 7:55 pm Post subject: |
|
|
I have them all programmed in across MCE keyboard 1 thru 4 on the xsight. Now what?
Thanks.
JR |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4580
|
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1429 Location: Munich, Germany |
Posted: Thu Aug 31, 2017 4:12 am Post subject: |
|
|
I imported Dave's ict file in IrScrutinizer, deleted the MCE signals, exported as a text file, and fed it into IrpTransmogrifier. It produced
Code: |
A: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
B: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x10,C=0x0,D=0x28,E=0x0}
weight = 20
C: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x8,C=0x0,D=0x30,E=0x0}
weight = 20
D: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-269m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
Home: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-269m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
-: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-169m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
#: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xb0,C=0x1,D=0x0,E=0x2}
weight = 21
*: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xa0,C=0x1,D=0x28,E=0x2}
weight = 21
.: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0x68,C=0x1,D=0xb8,E=0x0}
weight = 21
+: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0x30,C=0x1,D=0x70,E=0x2}
weight = 21
alt: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0x30,C=0x0,D=0x0,E=0x4}
weight = 21
&: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xc8,C=0x1,D=0x20,E=0x2}
weight = 21
@: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0x50,C=0x0,D=0xf8,E=0x2}
weight = 21
`: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x18,C=0x1,D=0xa8,E=0x0}
weight = 20
/: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-169m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
Caps Lock: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x0,C=0x0,D=0x0,E=0x0}
weight = 20
^: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xe8,C=0x1,D=0xc8,E=0x0}
weight = 21
:: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xa8,C=0x1,D=0x18,E=0x2}
weight = 21
,: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x40,C=0x1,D=0x99,E=0x0}
weight = 20
ctrl: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x50,C=0x1,D=0xb1,E=0x0}
weight = 20
$: {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m){A=0x20,B=0x18,C=0x0,D=0x0,E=0x1}
weight = 20
": {306,msb}<-1,1|1,-1>(9,A:8,B:8,C:8,D:8,E:5,-74m)7{A=0x20,B=0xd8,C=0x1,D=0x8,E=0x2}
weight = 21
|
(Command line was
Code: | irptransmogrifier analyze --repeat --name ~/jp1/mce_keyboard/newkeys.txt --decoder biphase --maxparameterwidth 8 | )
(Please ignore "weight = ...."). (The split of the payload parameter is arbitrary.) Remarkable is that several different keys apper to send the same signal (A, D, Home,...) |
|
Back to top |
|
|
xnappo Expert
Joined: 30 Dec 2003 Posts: 862
|
Posted: Thu Aug 31, 2017 8:48 am Post subject: |
|
|
jriker1 wrote: | Thanks for all the responses. I was looking at Kodi's keymap, oddly I have no unmapped keys to point to anything. Other thoughts if possible:
1. can you somehow make up any IR code and just use it or does it have to comply to some existing one?
2. my Xsight is learning and I have a Logitech One remote also. Any opportunities there to clone something from Logitech's database?
Thanks.
JR |
Wow really? Already using all the colors and even the 'radio' button? If so, then yes, you can try using an unused EFC. With my receiver some work and some don't. |
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
Posted: Thu Aug 31, 2017 9:05 am Post subject: |
|
|
Why when I open the files I uploaded on my local computer they show all the buttons tied to the remote, but on another computer, they are just a shell of a text file and no key mapping show? Is there other files other than the rmdu files that are generated?
Thanks.
JR |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4580
|
Posted: Thu Aug 31, 2017 9:25 am Post subject: |
|
|
Sorry, just now looked at these files. Learns are stored in your main RMIR file, not the individual RMDU files. Did you save a copy of your RMIR file for each learning session? If so, zip and post those. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7082 Location: Florida |
Posted: Thu Aug 31, 2017 9:41 am Post subject: |
|
|
Big question, did the "S" send the code you were looking work? I don't have access to a real computer today, so I'm just doing what I can on mobile. |
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
Posted: Thu Aug 31, 2017 10:04 am Post subject: |
|
|
Yep, clicked on device "MCE Keyboard 3" and clicked on the softkey "S" and the expected settings menu came up. Was pretty excited about it. From one of the other links sent in this thread about Kodi, thinking there are other commands in the keyboard I can reuse, like My Movies, My Music, etc. In theory looks like it supports those command from ehome and should take you to the associated area of Kodi.
As for saving the individual RMIR files, no. Right now I have the remote with the four individual MCE Keyboard learns still on the remote and backed up the whole thing with remotemaster. is that adequate?
JR |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21453 Location: Chicago, IL |
Posted: Thu Aug 31, 2017 3:22 pm Post subject: |
|
|
jriker1 wrote: | As for saving the individual RMIR files, no. Right now I have the remote with the four individual MCE Keyboard learns still on the remote and backed up the whole thing with remotemaster. is that adequate?
JR |
RM (Remote Master) is a program that serves 2 functions, one is to create device upgrades, which get saved as RMDU files, and the other is to program the remote itself, and these remote configurations get saved as RMIR files.
So, if you've learned some signals using the remote and you want us to look at them, you need to save your RMIR file and post it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4580
|
Posted: Thu Aug 31, 2017 5:06 pm Post subject: |
|
|
Perfect |
|
Back to top |
|
|
jriker1
Joined: 18 Jun 2017 Posts: 38
|
Posted: Thu Aug 31, 2017 6:07 pm Post subject: |
|
|
Did a lot of my entries even record anything? I see like repetitive 36036 for the frequency so that's not unique. Then ** None ** for the protocol, and device, sub device, OBC, Hex Cmd and Misc are all blank. And these are the soft keys I know I set. Obviously they were on the remote and worked but the learned info was concerning. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|