View previous topic :: View next topic |
Author |
Message |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Sun May 21, 2017 7:05 am Post subject: 351601 Potenza BC4 remote rdf |
|
|
Original subject title: Power punch through for STB control
Hello all,
It has been a long time since I've done anything with JP1. We have just moved to a new house and in the process picked up a new TV provider and associated remotes. The good news is that the remotes appear to have JP1 headers, the bad news is that I have no idea where my JP1 cabling is at at this point.
In the end, I'm only looking for a very small tweak in the short term that I'm hoping may be possible without going all in on JP1. The remote has a tag inside with the following numbers:
66950BC4-13-R C163701
I'm using it to control an Amino IP-based STB. As it stands right now, it is requiring me to switch into TV mode to turn the TV on and off and then switch back to STB mode to control the box. What I'd like to be able to do is have STB mode punch through the power toggle to the TV instead. I don't care whether or not I turn off the STB box. I'm sure this is possible if I did a full JP1 program (with help from this group!), but is there any way to do this with this remote without JP1 programming? Volume is punched through, but they don't document doing the same for the power button.
Thanks,
Craig |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Sun May 21, 2017 7:39 am Post subject: |
|
|
Try the following:
1. tv
2. press and hold setup(set or whatever the remote calls it) for two blinks
3. enter 9 9 4
4. press POWER
5. press STB
6. press POWER _________________ Edmund |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Sun May 21, 2017 8:12 am Post subject: |
|
|
That didn't seem to work unfortunately. Any other ideas? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Sun May 21, 2017 12:56 pm Post subject: |
|
|
Could you be more explicit in what didn't work? For example, did you get 2 flashes after you held setup for a few seconds? If so, did you get 2 flashes after typing 994?
Could you give us more clues as to the remote you are using, like what is the brand of the TV service that the remote came with?
Also, could you try using the 983 command to blink back the remote's signature:
http://www.hifi-remote.com/wiki/index.php?title=983 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Sun May 21, 2017 7:04 pm Post subject: |
|
|
It might be the power key doesn't accept keymoves? Try a different key to land on. _________________ Edmund |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Sun May 21, 2017 7:43 pm Post subject: |
|
|
Sorry I wasn't clear. I did get 2 flashes after holding setup and typing 994. It just didn't seem to work.
The remote came with my new IP based TV provider (BEVCOMM). The STB is http://www.goamt.com/products/a540-high-definition-pvr-iptv-set-top-box . I did the 983 command and got 35161.
If the power button doesn't accept keymoves, it seems like I won't be able to make this work the way I'd like?
Craig |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Sun May 21, 2017 8:07 pm Post subject: |
|
|
Unfortunately the 35161 remote is not one we've seen before so I can't confirm what it can or cannot do.
Have you tried copying the POWER button to a different button? I don't know what buttons are spare, but here's how you do it:
1. tv
2. press and hold setup for two blinks
3. enter 9 9 4
4. press POWER
5. press STB
6. press {{a spare button}}
If that doesn't work, but you have a spare button that would work for this, tell us what setup code you are using for your television and I'll tell you how to do it using an advanced code. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Mon May 22, 2017 9:52 am Post subject: |
|
|
I found my JP1 cables. I'm going to see if I can get them to work... it has been a *long* time since I've used JP1, so I don't know if the cables work and I don't remember how to use any of this stuff anymore. Time to go re-read the basics! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Mon May 22, 2017 10:46 am Post subject: |
|
|
csete wrote: | I found my JP1 cables. I'm going to see if I can get them to work... it has been a *long* time since I've used JP1, so I don't know if the cables work and I don't remember how to use any of this stuff anymore. Time to go re-read the basics! |
It figures... my old cable does not fit in the remote. It appears when I built it, I used an 8 pin head (not sure why) and there is just not enough space to fit the connector on to the pins. My guess is that at this point, the cable is probably only going to support older JP1 versions and maybe it is time to just buy a new one? Does anyone have any other suggestions? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Mon May 22, 2017 2:34 pm Post subject: |
|
|
If your cable is old and you built it yourself, it's almost certainly a JP1 (EEPROM) cable, whereas your new remote is probably a JP1.4 remote.
The following cable will work with all newer JP1.x remotes and it costs lass than $10 on ebay:
http://www.ebay.com/itm/261101529602
If comes with 6 single hole connectors, which you can either glue together or replace with a 6-hole connector. More details here:
http://www.hifi-remote.com/forums/viewtopic.php?t=16360 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Tue May 23, 2017 10:02 am; edited 2 times in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Mon May 22, 2017 2:42 pm Post subject: |
|
|
The Robman wrote: | If your cable is old and you built it yourself, it's almost certainly a JP1 (EEPROM) cable, whereas your new remote is probably a JP1.4 remote.
The following cable will work with all newer JP1.x remotes and it costs lass than $10 on ebay:
http://www.ebay.com/itm/261101529602
If comes with 6 single hole connectors, which you can either glue together or replace with a 6-hole connector. More details here:
http://www.hifi-remote.com/forums/viewtopic.php?t=16360 |
Any way to get one faster than that? ![Smile](images/smiles/icon_smile.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Mon May 22, 2017 3:01 pm Post subject: |
|
|
Searching on eBay and refining search for North America only:
http://www.ebay.com/itm/401321405713
You would need to do something to change from the 1X6 connector to either individuals or 2X3. Or instead of $10, you could spend $25 or so and get one already set up with individual connectors. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
csete
Joined: 09 Jun 2005 Posts: 131
|
Posted: Tue May 23, 2017 6:42 pm Post subject: |
|
|
I sent them a message to check on pricing. $15 didn't seem too bad... $30, maybe not so good! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue May 23, 2017 7:38 pm Post subject: |
|
|
That's why we all buy the $8 cable on ebay! ![Smile](images/smiles/icon_smile.gif) _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|