KONKA HDCS52 CABLEDECO

juanmsole@gmail.com · Post by **juanmsole@gmail.com** » Sun Apr 30, 2017 4:50 pm

1. Device:KONKA HDCS52
2. Type of device: TVCABLE DECO
3. Year: 2014 (aprox)
4. JP1/UEI Remote model: slingbox 350
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? n/a
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
12. If you have a Nevo (or similar) remote, have you tried ez-rc.com? n/a

Post by **vickyg2003** » Sun Apr 30, 2017 5:00 pm

What kind of remote are you using. If we provide you with information how are you going to use it?

juanmsole@gmail.com · Post by **juanmsole@gmail.com** » Tue May 02, 2017 6:04 am

vickyg2003 wrote:What kind of remote are you using. If we provide you with information how are you going to use it?

Its for a slingbox 350. I had it working perfectly until the cable company changed the decos for KONKA HDCS52. Sadly it is not listed on the slingbox settings to reconfigure it. Can you help me? I don´t know much about this kind of things, I only can provide a picture of the remote control.

Thank you very much.

Post by **The Robman** » Tue May 02, 2017 10:28 am

ok, I will move this to the Slingbox forum.

juanmsole@gmail.com · Tue May 02, 2017 10:47 am

The Robman wrote:ok, I will move this to the Slingbox forum.

THANKS

alanrichey · Post by **alanrichey** » Wed May 03, 2017 1:06 am

Have you tried the Konka remote in the File Section ?

juanmsole@gmail.com · Post by **juanmsole@gmail.com** » Wed May 03, 2017 6:32 am

Yes, I tried the Konka KSDT980 but did not work

alanrichey · Post by **alanrichey** » Wed May 03, 2017 6:35 am

OK, here are the ground rules. If you want us to help you then we INSIST you read (in full) and follow the installation instructions for the Custom Remote.

You obviously didn't.

juanmsole@gmail.com · Post by **juanmsole@gmail.com** » Wed May 03, 2017 7:53 am

I´m terribly sorry. I´m not native english speaker and also new on this kind of things. I fully read it again, but for your answer I assume I might be missing something in traslation really important. I can´t find the words for your help and to apologize for my shortcomings.

alanrichey · Post by **alanrichey** » Wed May 03, 2017 8:35 am

OK, but the statement in the instructions, highlighted in red, that says;

IMPORTANT: If you have any problems installing these files please do NOT just report back it 'doesn't work',

Seems obvious and yet your reply was :

Yes, I tried the Konka KSDT980 but did not work

Hence my comment.

juanmsole@gmail.com · Post by **juanmsole@gmail.com** » Wed May 03, 2017 9:44 am

Oh my, now I see. I expresed myself wrong breaking the rules.
I didn´t all want to mean that the file does not work. I was trying to say, I tried but it´s not the file I need for my slingbox remote. Again I must apologize and thank you for your patience.

alanrichey · Post by **alanrichey** » Wed May 03, 2017 10:17 am

But you don't know that, it might not be working for other reasons. That is why I ask for the answers to those questions.

Post by **The Robman** » Wed May 03, 2017 10:42 am

Juan, we are trying to determine if the file didn't work because it contains the wrong code, or if it didn't work because you made some error in installing the code.

As you can probably see, each issue above requires different help from us.

juanmsole@gmail.com · Wed May 03, 2017 11:03 am

I will install it again for double check, and post the results.

Thank you all.