JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

First upgrade from learned commands Yamaha RX-V475 Receiver

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
coeal



Joined: 11 Jan 2017
Posts: 2

                    
PostPosted: Mon Jan 23, 2017 3:49 pm    Post subject: First upgrade from learned commands Yamaha RX-V475 Receiver Reply with quote

I am trying to create a custom upgrade for my Yamaha RX-V475 receiver and upload it to my URC 7960. I've learned 8 different commands (the 5 discrete HDMI inputs from the RX-V475 remote, vol +/- and power toggle) and copied down their EFCs from the Learned Signals.

Since their protocol in the Learned Signals tab was NEC1-y1, I used the NEC 4DEV Yamaha Combo protocol. I entered the 2 subdevices from the Learned Signals which were 122 and 126. For the functions, I entered the EFCs from the Learned Signals, changing the Y Style to y1 for all signals detected as NEC y1. Upon saving and upgrading the remote, only the Vol+/- keys work.

If I use a second learning remote (1056B01-L) to learn from my custom upgraded 7960, under learned signals it states:
"Malformed Signal: burst table extends beyond end of hex".

Here are the learned signals:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14353

And here is my (failing) upgrade:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14354

I've been through a bunch of threads and have tried upgrades for other RX-V receivers but none seem to do anything.

This is my first foray into JP1 so I apologize if there is anything I've forgotten. I'm happy to provide any additional details that may help.
Back to top
View user's profile Send private message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Mon Jan 23, 2017 4:35 pm    Post subject: Re: First upgrade from learned commands Yamaha RX-V475 Recei Reply with quote

coeal wrote:
and copied down their EFCs from the Learned Signals.

.


Use the OBCs. EFCs are numbers for simple protocols, and won't work on variations on executors.
Back to top
View user's profile Send private message Visit poster's website
coeal



Joined: 11 Jan 2017
Posts: 2

                    
PostPosted: Mon Jan 23, 2017 6:07 pm    Post subject: Reply with quote

Yep that did it. Told you I was a beginner! Thanks!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control