JP1 Remotes

Hi to all and happy new year.
I have a nevo c2 and I had added some devices, When I use the repeating buttons etc volume, selecting the device I want they are working fine.
Now I had cloned my TV device and in some buttons, including screen buttons I had added functions from my other devices etc ch+ ch- from my sat device and Volume + volume - from my home cimena.
There are working fine but the buttons that must sent repeating commands are not working, so to volume up, I had to press the button a lot of times.
Is there a way to make those specific buttons to repeat?

Thanks in advance.

I am not familiar with what we can do with the Nevo's protocol executors, but when I build protocols for the remotes I am familiar with I have the choice of no repeats, repeat everything, or repeat the standard repeating keys (vol+-. ch+-, ff, and rew)

I am sure this is what you are running into, as you described exactly what I would expect. I am just unfamiliar with what we can do with executors in the newfangled remotes.

Some of the solutions in this thread might work for you:

https://www.hifi-remote.com/forums/viewtopic.php?t=16959

Hi this is not that I try to do.
I had search all the forum and I had fount this thread https://www.hifi-remote.com/forums/viewt ... p?t=100235
This is exactly what I want, I have done this with NEC 4DEV Combo, followed the instructions but nothing is working with the functions that is added in the main device I had changed from NEC to NEC 4DEV Combo.
All the functions I have added and mapped concerning other devices are still working.
To explain better, I had cloned my TV Device that is all the functions as my exact stock remote.
This new cloned device I had renamed it to Remote Combination. So in this device I had mapped some functions from my other devices that were programmed in the C2, etc on sceen vol+ vol- control my home cinema Record play rewind control My DVD writter etc, this is good because to lower the volume of the home cimema I had to press devices choose home cimema device, to switch on the DVD Writer I should choose the DVD device and press power etc.
I hope I had exlpained this well for you to undersatand what I want to do.
With the activities function this can be done but this is limited in some groups of buttons, with the one I try to do every button of the remote could control what device I want.
Are are working fine except for the buttons I want to repeat..

Thanks in advance

Hi
I had found the solution I write it down for others in the forum if they have the same problems

The differences from the biGdada member solutions was:

1. convert DEVICE profile from NEC1 to NEC 4DEV Combo. ( Correct )
2. Set device and subdevice (1 and 2) according to my DEVICE and my amp remote. ( Not correct for me ) My device 1 device was 4 sub 0 second was 44 and 44. If I put 4 and 0 nothing is working I should put device 4 subdevice 251 for device one and device 44 and subdevice 44 for device 2.
3. set device and subdevice 3 and 4 to zero. ( Correct )
4. Added vol+ and vol- EFC from AMP profile to the new profile, and modified dev.sub according to original AMP profile.THIS CORRECT BUT
In my case device 2 ( Home Cinema ) was NECX1 protocol, so in functions tab I had to correct DEvSub AND STYLE field ( both of them ). I had changed DEvSub 44.44 for my home cinema and style NECX1
5. mapped the buttons.

All the buttons I want are repeating
Thank all for help