JP1 Remotes

I don't have the original remote for the learning process of my universal one. The original has a button labeled, "Recall" that's function is needed for a factory reset procedure on my Toshiba 46LX177 tv.
Does anyone know if it's possible to use the original remote's EFC for its Recall button to code another button(like "Last") on my universal remote(without using the learning process, 'cause I don't have the original remote).
Also, I did a search on JP1 for the original remote, but it's not in the database.

My universal remote is: Vizio VUR-8
The original: Toshiba CT-90277
My TV: Toshiba 46LX177

Since you are posting in the Non-JP1 cattegory, I assume you don't have a cable either. This upgrade has a recall button. Remotes don't change that much from one model to another, so that will probably be a good one for you to try


https://hifi-remote.com/forums/dload.php ... e_id=12061

Now we need to know which setup code and which remote model you are using.

If the setup code you are using uses a simple Nec1 64 executor, then the EFC for recall would be 00244 or 244 depending on the vintage of the the remote.

Recall is supposed to display some information on the screen. Not sure why you need to reset the TV, but if it is not too hung up you should be able to test the Efc to see if it is the recall function on your model.