They sound like 10k.Capn Trips wrote:Well, I've opened it up, and the two similar resistors have the following color-code:
Brown-Black-Orange-Gold (or possibly the reverse) is that 10K or 1K?
Sky and Sky+ remotes - Easy (or not) to JP1?
Moderator: Moderators
Using the Macro function of the Sky+ remote
(TV Select+Green w x y z Select)
I've been extracting the codes for each button with the hope of getting a working RDF file.
Only one Macro is available and up to four buttons can be allocated. Any buttons on the remote can be used in the Macro except Sky, TV, TV Guide, Box Office, Services, Interactive, i and Select.
For those buttons that can be allocated, I set up a macro of four buttons and then used IR to read memory locations 18..1B to get the codes.
Looking at the Sky+ remote schematic, the codes appeared to tie in with their positioning in the 8x6 grid and this allowed me to fill in the codes for the unalloctable buttons.
I've made a mistake in the schematic as I listed the Help button twice! R5/C8 should be the Text button.
The only problem button is Select which is on a line all by itself so could be probably allocated a code of 01 or 31. I'm going with 31 for now but am willing to be corrected if I've guessed wrongly.
If they are any use to anyone else, here are the codes I've got (in hexidecimal):
Sky 09
TV 0A
Power 0B
Volume+ 0C
Volume- 0D
Channel+ 0E
Channel- 0F
Mute 10
TV Guide 11
Box Office 12
Rew 13
Play 14
Fwd 15
Stop 16
Pause 17
Rec 18
i 19
Interactive 1A
Services 1B
Help 1C
1 1D
2 1E
3 1F
Text 20
4 21
5 22
6 23
7 24
8 25
9 26
0 27
Back Up 28
Up 29
Down 2A
Left 2B
Right 2C
Red 2D
Green 2E
Yellow 2F
Blue 30
Select 31 (or may be 01)
Mike
(TV Select+Green w x y z Select)
I've been extracting the codes for each button with the hope of getting a working RDF file.
Only one Macro is available and up to four buttons can be allocated. Any buttons on the remote can be used in the Macro except Sky, TV, TV Guide, Box Office, Services, Interactive, i and Select.
For those buttons that can be allocated, I set up a macro of four buttons and then used IR to read memory locations 18..1B to get the codes.
Looking at the Sky+ remote schematic, the codes appeared to tie in with their positioning in the 8x6 grid and this allowed me to fill in the codes for the unalloctable buttons.
I've made a mistake in the schematic as I listed the Help button twice! R5/C8 should be the Text button.
The only problem button is Select which is on a line all by itself so could be probably allocated a code of 01 or 31. I'm going with 31 for now but am willing to be corrected if I've guessed wrongly.
If they are any use to anyone else, here are the codes I've got (in hexidecimal):
Sky 09
TV 0A
Power 0B
Volume+ 0C
Volume- 0D
Channel+ 0E
Channel- 0F
Mute 10
TV Guide 11
Box Office 12
Rew 13
Play 14
Fwd 15
Stop 16
Pause 17
Rec 18
i 19
Interactive 1A
Services 1B
Help 1C
1 1D
2 1E
3 1F
Text 20
4 21
5 22
6 23
7 24
8 25
9 26
0 27
Back Up 28
Up 29
Down 2A
Left 2B
Right 2C
Red 2D
Green 2E
Yellow 2F
Blue 30
Select 31 (or may be 01)
Mike