Posted: Fri Aug 02, 2013 10:39 am
Nothing about this makes any senseecdahl wrote:But if this is the case and the built-in IR transmitter is too weak, does it then make sense that the power button is working?
Page 3 of 3
Problem with flahing
Posted: Sun Dec 13, 2015 1:14 am
Hello,
I have DVB S2 set top box adb skt-5720sx with telecom Magio firmware.
when I disconect my HDD I see this message http://www.hifi-remote.com/forums/dload ... e_id=13768
when I connected HDD back, I see this message too.
I found this firmware, but I can´t flash it
http://www.hifi-remote.com/forums/dload ... le_id=7837
or
http://www.hifi-remote.com/forums/dload ... le_id=8183
(i don´t know which should I use.
please can you give me some instructions how to flash it?
I have DVB S2 set top box adb skt-5720sx with telecom Magio firmware.
when I disconect my HDD I see this message http://www.hifi-remote.com/forums/dload ... e_id=13768
when I connected HDD back, I see this message too.
I found this firmware, but I can´t flash it
http://www.hifi-remote.com/forums/dload ... le_id=7837
or
http://www.hifi-remote.com/forums/dload ... le_id=8183
(i don´t know which should I use.
please can you give me some instructions how to flash it?
Posted: Sun Dec 13, 2015 2:10 am
http://placeshiftingenthusiasts.com/how ... -slingbox/
(And please read them in full, I waste a lot of time with people who haven't bothered)
(Although that will do nothing to help with the first message, that has nothing to do with the Slingbox, that is a set-top box issue.
(And please read them in full, I waste a lot of time with people who haven't bothered)
(Although that will do nothing to help with the first message, that has nothing to do with the Slingbox, that is a set-top box issue.
Posted: Wed Dec 16, 2015 1:24 pm
Thanks, but this wasn´t helped me. now I connect HDD and Set top box boot up, but has onli telecom software based on Windows CE and USB, internet and many feautures are blocked, so a must flash it to new firmware. firmware is updating only with tunner (in settings) and my PC can´t inicialize controller of this HDD.
can you tel me some way how to flash it using USB or network?
Ps. when I disconect HDD apears firmware uptate using tunner, it shows tunner update from DL. tun2 and DNL2 I don´t know what it means.
sorry my bad english
can you tel me some way how to flash it using USB or network?
Ps. when I disconect HDD apears firmware uptate using tunner, it shows tunner update from DL. tun2 and DNL2 I don´t know what it means.
sorry my bad english
Posted: Wed Dec 16, 2015 1:29 pm
Alan is only able to help you get your Slingbox to control your STB, whereas it sounds like you need help getting your STB working. It's very unlikely that anybody here knows anything about your STB. You should search to see if there is another forum that deals with that STB where there might be experts who can help you. When I search for "adb skt-5720sx" most results are in a foreign language, quite possibly in your language.
Posted: Wed Dec 16, 2015 2:10 pm
Yes, as I said on my previous post the message is nothing to do with the Slingbox you need to ask an ADB expert (or maybe read the manual ?)
Posted: Fri Dec 18, 2015 8:16 am
I also think that it would be the solution, but I browsed all websites about firmware flashing on set top boxes including devices working under a similar principle for example GPS (runing under WIN CE) but I didn´t find anything to help me solve this problem.
I didn´t try asking ADB Experts, can you advise how to contact them?
I didn´t try asking ADB Experts, can you advise how to contact them?
Posted: Fri Dec 18, 2015 9:24 am
It was generic advice meaning you should try to find an expert, we're just remote control guys here. So, either try contacting ADB directly, or try to find a forum where people seem to know about ADB and ask there, or buy a new box.PeterKarvai wrote:I didn't try asking ADB Experts, can you advise how to contact them?