Page 2 of 2
Posted: Fri Jun 09, 2006 4:36 pm
by Capn Trips
On the first page or RM, the setup page, where you select a remote.
There is a drop-down menu that should list MANY, MANY JP1 remote controls. On that list is two versions of Slingbox. Pick the one that is yours (choosing the right one is described in the various guides).
Then got the layout page and assign the functions to the buttons you want.
Then export this rmdu file to a binary file.
Posted: Fri Jun 09, 2006 4:48 pm
by johnsfine
I'm helping dvbspider with Slingbox support for another device in this thread:
http://www.hifi-remote.com/forums/viewt ... 5403#45403
Slingbox appears twice in the list of choices in the pull down for "Remote" near the top of the RemoteMaster window. If it isn't there, make sure your RemoteMaster and your RDF files are up to date and that RemoteMaster has the right directory set for RDF files.
Once you get that far, we need to figure out JU vs. PL version of the Slingbox. I assume that answer is the same for both your threads (they aren't two different versions of Slingbox). I haven't looked up how to determine that, since I can't do it for you anyway.
Posted: Fri Jun 09, 2006 5:21 pm
by The Robman
johnsfine wrote:Once you get that far, we need to figure out JU vs. PL version of the Slingbox.
If there's any doubt as to which version of the Slingbox you have, just create 2 bin files (one JU and one PL, or for Europeans that have one of the new PAL boxes, RV)
It work,, but have some problems
Posted: Wed Jun 21, 2006 3:56 pm
by dvbspider
Buttons on the control remote are not working like supose to..
do , I need to make another bin file.