Elan Equipment (Z880, Z100, Z150 & System 6)

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
jetskier
Posts: 287
Joined: Tue Dec 09, 2003 5:58 pm
Location: Nevada

Post by jetskier »

It's been 10 years now since creating this protocol for the JP1 remotes.

Recently, I bought a couple URC7935 Streamer to experiment since I no longer need multiple device remotes for everyday use. I still use my nearly 20 year old Elan equipment for audio amps in some room throughout the house.

Can an expert assist creating a protocol upgrade for the MAXQ610? RMPB doesn't have much in regard to the JP2 remotes. Otherwise, I'd create my own with the same timings, etc.

http://www.hifi-remote.com/forums/dload ... e_id=11499
Top
Post Reply

Return to “JP1 - Protocol Decodes”