ADB-5720SX

Post by **The Robman** » Mon Jan 11, 2010 2:38 pm

Try this...
http://www.hifi-remote.com/forums/dload ... le_id=7837

serialnik · Post by **serialnik** » Mon Jan 11, 2010 3:14 pm

Ok, not so good...

Looks like the remote is repeating signal 4 times (XMP + XMP-R + 4 copies) (start at 0, end at 107). So if I press some button one time, Slingbox presses it two times.

Post by **The Robman** » Mon Jan 11, 2010 4:07 pm

Actually, that is good because it means it's working, I can adjust the repeats.

I've updated the files to have a shorter repeat.

serialnik · Post by **serialnik** » Wed Jan 13, 2010 2:03 pm

Thanks. Work superb!

Post by **The Robman** » Wed Jan 13, 2010 2:30 pm

Good to hear, did you test both files (ie, PL and RV) ?

serialnik · Post by **serialnik** » Wed Jan 13, 2010 2:32 pm

Yes, both are working perfectly. Thanks again.

serialnik · Post by **serialnik** » Thu Mar 17, 2011 3:36 pm

Looks like this remote is not working with PRO-HD SB300-110 (UK/PAL version)

Code: Select all

Product signature: 8
Hardware version: 2.53.0
IR Blaster version: 5
Firmware version: 2.1.90

ecdahl · Post by **ecdahl** » Wed Jul 31, 2013 10:36 am

Hi,

Does anyone have a working bin file for the ADB 5720SX satellite decoder (it's branded Canal Digital HD PVR 5720SX). I have tried all the ones on this site, but it seems only the power button is working, at least I'm not able to swap channels. I need it for a Slingbox 350.

Any help would be much appreciated.

Cheers,
Charles

alanrichey · Post by **alanrichey** » Wed Jul 31, 2013 10:43 am

I doubt you will get a better one than the one posted as a result of this thread. And it looks as though 385 people have downloaded it and are using it successfully.

http://www.hifi-remote.com/forums/dload ... le_id=8183

What exactly works/doesn't work on that one ?

ecdahl · Post by **ecdahl** » Thu Aug 01, 2013 7:28 am

Hi Alan,

No, this file (S2012_PL.bin) does not work at all, not even the power button works, so not exactly sure what's going on here. At the moment I'm using a Canal Digital remote (HD PVR 101-ST), which allows me to turn the decoder on/off.

When I tried the S2012_PL.bin (with the decoder on), I saw that the stream/connection was briefly halted every time I pressed a button, but unfortunately nothing happened.

Model: Slingbox 350
Firmware Version: 1.1.52
Hardware Version: 1.1.0

Any other suggestions I could try?

Cheers,
Charles

alanrichey · Post by **alanrichey** » Thu Aug 01, 2013 8:10 am

Now I look that is a Polish version. What happened when you tried the proper ADB 5720 CDX Custom Remote at http://www.hifi-remote.com/forums/dload ... e_id=10781

ecdahl · Post by **ecdahl** » Thu Aug 01, 2013 8:48 am

With the ADB 5720 CDX (V2010_PL.bin) only the power button works, I tried pressing all the other buttons on the remote, but nothing happened.

So pretty much at status quo...

alanrichey · Post by **alanrichey** » Thu Aug 01, 2013 10:45 am

Not all, big step forward. As the Power button works we know that your box still uses the NEC1 IR Protocol with a Device code of 134.14 of the normal ADB 5720 box. And the power button uses Code 18.

What isn't making much sense is that none of the other buttons work. The codes for this box are very straightforward (0=0, 1=1, 2=2... Up Arrow=11, Down Arrow=12....) so it is very odd that nothing else works.

Have you tried plugging in the External Blaster on the 350 ? Maybe the built-in IR is not very strong ?

Post by **vickyg2003** » Thu Aug 01, 2013 11:05 am

Charles, does the power button turn the unit on AND off, or only on?

ecdahl · Post by **ecdahl** » Fri Aug 02, 2013 6:08 am

Alan, no I haven't tried the external blaster yet. Unfortunately, there's nobody at the site where the slingbox is located, so until I go there I won't be able to test this. But if this is the case and the built-in IR transmitter is too weak, does it then make sense that the power button is working? In the past I had a Sagem decoder in the exact same position (they are placed next to each other), and I never experienced any issues with the remote control.

Vicky, the power button works for turning the unit both on and off, so no issues there.

It is very strange indeed.

Cheers,
Charles

JP1 Remotes

ADB-5720SX

ADB 5720SX remote bin file for Slingbox 350