Page 2 of 2
Posted: Fri Sep 13, 2019 4:25 pm
by davecs
davecs wrote:I've just bought a OARUSB4G from Amazon.com. It will take a couple of weeks to arrive from the USA to the UK, but even with the postage, works out cheaper than the URC6440 bought in the UK (even if you can find one for sale).
$17.73 including delivery to UK. <£15.
It arrived a lot faster than I expected. Today, in fact! Using the instructions about how to convert an extended URC-6440 rmir file into one for the OARUSB04G, I've got it working perfectly. And it's shiny and new!
Posted: Sun Dec 08, 2019 7:04 am
by quartermain
Hi
This link now appears to be stale.
Posted: Sun Dec 08, 2019 9:39 am
by mdavej
The 6440 doesn’t need a JP1 cable at all.
Posted: Sun Dec 08, 2019 10:42 am
by The Robman
quartermain wrote:This link now appears to be stale.
Correct, updated links are always found in this thread:
https://www.hifi-remote.com/forums/viewtopic.php?t=16360
mdavej wrote:The 6440 doesn't need a JP1 cable at all.
Right, that was posted in response to the guy asking about
getting a 7955 or 7980.
Posted: Mon Dec 09, 2019 8:56 am
by quartermain
Is there anyone these days selling the cable with the small 2x3 connector already fitted?
I had one from Tommy Tyler years ago but it died so now I'm using the one with six separate connectors held together with insulating tape.
Posted: Mon Dec 09, 2019 10:05 am
by The Robman
quartermain wrote:Is there anyone these days selling the cable with the small 2x3 connector already fitted?
I had one from Tommy Tyler years ago but it died so now I'm using the one with six separate connectors held together with insulating tape.
Not that I know of, although DIY Gadget may have some cables.
Did you know that you can buy a bag of 40 of the little 2*3 connectors for $3.80 shipped on ebay. You can then slip the wire terminals out of the individual connectors and then slide them into the 2*3 connector.
https://www.ebay.com/itm/263051820184
With a stash of 40 on hand, you could buy some spare cables and have them ready to go.
Posted: Mon Dec 09, 2019 11:51 am
by quartermain
I followed that link earlier but they don't ship to the UK.
However on the "chip partner FTDI cable" page there are two other eBay links, one of which does appear to ship to the UK. I'd have to buy 100 but that's OK.
Posted: Mon Dec 09, 2019 5:37 pm
by The Robman
Wow, I hadn't noticed that before, he ships worldwide except for Africa, China, Australia, Sweden, United Kingdom, Guatemala, Hong Kong, Brazil, I wonder what he has against all those countries. It's funny he won't ship to China either and he's in China.
The listing for 100 is only $5 US (about 3 GBP), so that's not too bad.
Posted: Tue Dec 10, 2019 9:52 am
by quartermain
Slightly off topic, but does anyone know if the 7955 or 7980 support macros on device keys? I'm guessing not since they don't have actual device keys just a "devices" key.
If not I guess that just leaves the 1240, 1280 and 2981 as current models with at least four device keys.
Posted: Tue Dec 10, 2019 10:08 am
by mdavej
Inteset INT-422 has 4 device keys (plus 4 phantom devices for a total of 8). It's been my favorite non-LCD JP1 remote for a decade now.
https://www.hifi-remote.com/forums/viewt ... c&&start=0
https://intesettech.com/index.php/produ ... ia-shield/
Posted: Thu Dec 12, 2019 12:00 pm
by quartermain
Does it support macros on device keys? I use those for source switching.
URC 6440 replacement
Posted: Thu Dec 12, 2019 3:45 pm
by HamburgerHelper1
I just tested my Inteset INT-422-3 and yes it supports Macros and DSM on the device keys. Actually if you had not asked I never would have never tried it.
So that info is nice to know in case I need it in the future