Nevo c2 learning mode is frustrating, any workaround?

mdavej · Post by **mdavej** » Thu Mar 23, 2017 12:09 pm

Looks good. I'll post a completed TCL upgrade soon.

Even though your Pio learns are functioning correctly, they are unreadable by our software. Doesn't matter because we don't really need them when we have the spreadsheet I linked. It will take a bit more time to build that file.

One last question, what's the model number of your TV?

Thanks

announcerzambia · Post by **announcerzambia** » Thu Mar 23, 2017 12:26 pm

its U55S6906 and remote rc311 fui1.

mdavej · Post by **mdavej** » Thu Mar 23, 2017 2:55 pm

Added new TCL TV upgrade.

You can replace your device with this one and delete all your TV learns.

Let us know how it works.

https://www.hifi-remote.com/forums/dload ... e_id=14484

announcerzambia · Post by **announcerzambia** » Thu Mar 23, 2017 4:11 pm

ok, have to figure out the importing device upgrade thing and ill test it.

Thanks, that worked fine. Also edited the option text error I see.

edit.
The ok button did not seem to work, and missing eco soft key so I added them abck.

mdavej · Post by **mdavej** » Fri Mar 24, 2017 7:13 am

Thanks. To fix OK, can you look at your older file with the learn for it (I didn't keep it), and look at OK on the learned tab, and tell me what numbers you see in OBC and Device. I have 244 and 15 in my upgrade.

FYI, the function I'm calling Menu-alt was the original menu code from the official file from One For All, which is different from what you learned. Could you test it as well and see if it works the same as Menu?

announcerzambia · Post by **announcerzambia** » Fri Mar 24, 2017 10:10 am

set up again and now the ok button worked...it was the same code as learned.

The menu-alt has the same function yes.

Also my old pioneer remote codes works on the new one. Good since the new remote on the pioneer is missing lot of options compared to old one.

The phone app is good, but also would like good remotes.

mdavej · Post by **mdavej** » Sat Mar 25, 2017 2:46 pm

Was kind of a bear, but got the Pioneer done using 3 upgrades (about 300 functions in all). Impossible to do in less than 3 upgrades due to the number of device codes used.

https://www.hifi-remote.com/forums/dload ... e_id=14487

Give it a try and let me know how it works. Some of the command names may be too long or incompatible format. See the spreadsheet linked earlier for reference.

announcerzambia · Post by **announcerzambia** » Sun Mar 26, 2017 8:03 am

thanks. lot of commands to play with and test if they work.