OARC05G

mdavej · Post by **mdavej** » Tue Dec 21, 2010 12:31 pm

Does anyone know if the subject remote supports key moves and advanced codes?

TIA

3FG · Post by **3FG** » Tue Dec 21, 2010 1:01 pm

The 3rd post in this thread implies (to me, anyway) that it does.

MaskedMan · Post by **MaskedMan** » Tue Dec 21, 2010 4:42 pm

Yes, it does keymoves and accepts 5 digit EFC's.

Pichet · Post by **Pichet** » Wed Dec 22, 2010 12:42 pm

mdavej wrote:Does anyone know if the subject remote supports key moves and advanced codes?

TIA

Are you asking because you're shoping and now wonder if that's a good deal???

If so, look closely at the key layout: direct channel entry is difficult as the numbers
are located at the top and those keys are just a bit too small to avoid mistyping...

mdavej · Post by **mdavej** » Wed Dec 22, 2010 2:05 pm

Thanks everybody. I'm asking for someone else, but thanks for the warning.

3FG · Post by **3FG** » Sun Oct 12, 2014 11:24 am

I stumbled on this thread. Just for closure, based on what we have learned in the intervening 4 years: The OARC05G is very likely a JP1.4 remote with firmware signature 319701.

ckeays · Post by **ckeays** » Sat Sep 28, 2019 4:43 pm

3FG wrote:I stumbled on this thread. Just for closure, based on what we have learned in the intervening 4 years: The OARC05G is very likely a JP1.4 remote with firmware signature 319701.

sorry for responding to this old post.
So this remote can be reprogrammed using the same tools & cable as a JP1.3?
If not what else is needed?
thanks

mdavej · Post by **mdavej** » Sat Sep 28, 2019 5:50 pm

No. You need a lot more than that. You really need to read the whole thread to know what you're getting into.

mdavej · Post by **mdavej** » Sun Sep 29, 2019 1:10 pm

There are other remotes, pretty much identical to this one that actually do work with our tools and cables without requiring any hardware mods, like the URC-7940 and 7950.

Post by **The Robman** » Sun Sep 29, 2019 2:31 pm

Did anyone ever bother to fabricate a JP1 connection and successfully connect to this remote?