|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Wed Dec 01, 2010 8:17 am Post subject: |
|
|
Keep in mind that the signals in my file were generated by hand, so it's possible that there's something that I did wrong, from DecodeIR's point of view. I'll download the DLL and test it out later.
Could you post the IR file that you created? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Wed Dec 01, 2010 11:20 am Post subject: |
|
|
Dave, I've tested the new version and it looks good. I used some valid NECx1 signals and they decode as NECx1, both normal versions and modified Yamaha versions.
I've also tracked down an NEC1/NEC2 issue.
The following Pronto hex (from Remote Central decodes as NEC2 even though it's clearly NEC1. The problem is the leadout time. The hex below has 00b1 as the final leadout, if you change this to something more realistic like "0EAB" then it decodes as NEC1.
0000 0069 0022 0002 0161 00b1 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0042 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0042 0016 0609 0161 0058 0016 00b1
Here are some hand generated samples that you can use to verify, if you like...
NECx1 (normal)
0000 006d 0022 0003 00ab 00ab 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 06a3 00ab 00ab 0015 0015 0015 0e79
NECx1-y1
0000 006d 0022 0003 00ab 00ab 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 06a3 00ab 00ab 0015 0015 0015 0e79
NECx1-y2
0000 006d 0022 0003 00ab 00ab 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 06a3 00ab 00ab 0015 0015 0015 0e79
NECx1-y3
0000 006d 0022 0003 00ab 00ab 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 06a3 00ab 00ab 0015 0015 0015 0e79 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Thu Dec 02, 2010 10:03 am; edited 1 time in total |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Wed Dec 01, 2010 5:02 pm Post subject: |
|
|
Quote: | Could you post the IR file that you created? |
I'm trying to think up a good excuse-- I didn't make one. Instead I repeatedly downloaded learned signals from a remote, and pasted in vaious Pronto Hex codes, some of which I modified on the fly. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Wed Dec 01, 2010 5:36 pm Post subject: |
|
|
No worries, I found some NECx1 and NECx2 signals over at Remote Central. What I did was this, I looked up a device that uses NECx1 in my jp1 master 1.05 spreadsheet, then went and looked for discrete codes for that brand over at R/C. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Wed Dec 01, 2010 10:46 pm Post subject: |
|
|
I have a Zenith DVD player and a remote plus an old IR file with NECx1 learned signals. Would any of this be of any use to you? They're not yamaha type of signals, just old, 2005 stuff. _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Wed Dec 01, 2010 11:59 pm Post subject: |
|
|
Liz,
Thanks for the offer, but my plan is to only deal with NEC signal which differ from the traditional rule which defines the 4th data byte in terms of the 3rd. I don't intend to worry about the differences between NEC1/NEC2/NECx1/NECx2, which are concerned with lead times and repeat format, and which I suspect are handled well already. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Thu Dec 02, 2010 12:13 am Post subject: |
|
|
Rob,
I think that the signal which you've labeled as NECx1-y1 is really -y2. The one labeled as -y2 is really -y1. I use IRv8.03 to keep track of this. The IRP form is shown in the learned signal section, and it includes, for example, this: {A=$B4B46E11,B=$0}. This is from the hex you've labeled -y1. Comparing the bit flip in this signal to that of Pronto Hex provided by Yamaha (which I think we agree should be called -y1), it's clear that 6E 11 is not a -y1 pair. 6E 90 is -y1.
As I mentioned to Liz, I don't intend to try to "improve" the resolution of the various NEC styles, and my ain in coding up the Yamaha styles is to not alter the logic which decides the flavor of NEC. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Thu Dec 02, 2010 8:24 am Post subject: |
|
|
You're right, I re-labeled them in IR but forgot to re-label then in notepad which is where I copied these from. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|