JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

ToadTog and URC-6800/7800

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Extenders
View previous topic :: View next topic  
Author Message
poet99



Joined: 05 Jan 2004
Posts: 27

                    
PostPosted: Mon Jan 26, 2004 12:55 pm    Post subject: ToadTog and URC-6800/7800 Reply with quote

I would like to create ToadTog commands in order to make my 2700/4700 ExpressVu satellite receivers and my Sanyo VHR-H608 VCR turn off with my power off macro (and on/off in other device change macros). I know for sure that there are no discrete on/off codes for the ExpressVu receivers and I was not able to find any that work with my Sanyo VCR.

I found the ToadTog.asm file at Yahoo JP1 Files. Can this work at all with the URC-6800/7800? (i.e. should I go on studyng the readme file)

Thanks in advance

François
Back to top
View user's profile Send private message
Scott



Joined: 03 Aug 2003
Posts: 3

                    
PostPosted: Thu Jan 29, 2004 5:11 pm    Post subject: Re: ToadTog and URC-6800/7800 Reply with quote

poet99 wrote:

I found the ToadTog.asm file at Yahoo JP1 Files. Can this work at all with the URC-6800/7800? (i.e. should I go on studyng the readme file)

yes the readme file is the one you want for instructions, but the file is for the 1994. You can get the toadtog file for the 7800 in the files subsection special protocols. You want the KeyFilter.zip file.

When editting the .asm to setup your toggles, I would change a few things in the define a key section:
Add,,,,Discrete_on=3A,,,,,,,,,,,,,,,,,,,,after all we are talking about
,,,,,,,,,,Discrete_off=3B,,,,,,,,,,,,,,,,,,,,discretes so I would want them

change,,,,,,_2L=3A
,,,,,,,to,,,,,,,_2L=30

Then if you are using extender 1, assemble the asm file with S3C8
If you are using extender 2 and you want fast macros you'll need to find:

OR R00, 20 ;Flag the fact that a macro is running
and replace with
LD R78, 2 ;Flag the fact that a macro is running

Scott
Code:
Back to top
View user's profile Send private message
poet99



Joined: 05 Jan 2004
Posts: 27

                    
PostPosted: Thu Jan 29, 2004 7:10 pm    Post subject: Reply with quote

Thanks a lot, Scott. I had overlooked this one.

When I said studying, I meant studying. I still have to try and learn how this works...

I will probably have to ask a few questions later on.


François
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Extenders All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control