View previous topic :: View next topic |
Author |
Message |
FastKatt
Joined: 28 Oct 2009 Posts: 5 Location: Rockford, Illinois |
Posted: Wed Oct 28, 2009 5:25 pm Post subject: |
|
|
The problem with the AUX Work Around is you're have to be in AUX Mode for it to work...
I'm glad I got Comcast to give me the updated code |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3365
|
Posted: Thu Oct 29, 2009 12:40 am Post subject: |
|
|
FastKatt,
What setup code are you using together with EFC 00083? |
|
Back to top |
|
|
FastKatt
Joined: 28 Oct 2009 Posts: 5 Location: Rockford, Illinois |
Posted: Thu Oct 29, 2009 7:23 am Post subject: |
|
|
1) Select Cable Button
2) Hold SETUP, 2 Flashes
3) Type 994, 2 Flashes
4) Tap SETUP
4) Enter the EFC 00083
5) Tap the button to be programmed [A]/[Triangle], 2 Flashes |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Thu Oct 29, 2009 8:29 am Post subject: |
|
|
What's the CBL device setup code you're using, 0476 or something like that? If you don't remember, you can do a code blink back as follows:
PRESS the device (TV,VCR,CABLE,etc.) button - RELEASE
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)
PRESS 4, carefully COUNT the number of blinks. (4th digit)
No blink means zero |
|
Back to top |
|
|
FastKatt
Joined: 28 Oct 2009 Posts: 5 Location: Rockford, Illinois |
Posted: Sat Oct 31, 2009 9:34 pm Post subject: |
|
|
Not sure the code is right, Wife says it skips 5min, not 30sec... |
|
Back to top |
|
|
FastKatt
Joined: 28 Oct 2009 Posts: 5 Location: Rockford, Illinois |
Posted: Sat Oct 31, 2009 9:38 pm Post subject: |
|
|
Not sure the code works,...
My Wife says it was jumping 5min, not 30sec |
|
Back to top |
|
|
tennessee titan
Joined: 18 Nov 2008 Posts: 117
|
Posted: Sun Mar 14, 2010 5:40 pm Post subject: |
|
|
I looked at all my comcast upgrades for the moto boxes and I could not find an 00083 anywhere. 00173 works for me on all 3 variants of comcast remotes (grey setup, red setup, and new dark grey remote).
I am using 0476 setup modified.
I used this upgrade on the older DCH3416 and the new DCX3400. |
|
Back to top |
|
|
grouch50
Joined: 15 Jul 2010 Posts: 5 Location: United States |
Posted: Thu Jul 15, 2010 1:32 pm Post subject: 30 second skip |
|
|
I have read all the responses for programing the new control (red) with the DCX3400. Help. I am really a beginner and need instructions for a dummy to follow so I can't screw it up.
Can you all help? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Mon Sep 13, 2010 12:42 pm Post subject: Re: 30 second skip |
|
|
grouch50 wrote: | I have read all the responses for programing the new control (red) with the DCX3400. Help. I am really a beginner and need instructions for a dummy to follow so I can't screw it up.
Can you all help? |
Do this...
vickyg2003 wrote: | Here's how you program an EFC on the RED OK-button remote...
The red button remote uses 5 digit setup codes. The gray button remote instructions will be different.
1)Select Aux
2) Hold setup 2 flashes
3) type 01376 2 flashes
1) select Aux button
2) Hold SETUP, 2 flashes
3) Type 994, 2 flashes
4) Tap SETUP
4) Enter the EFC 00173
5) Tap the button to be programmed [Cbl][triangle], 2 flashes |
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
tennessee titan
Joined: 18 Nov 2008 Posts: 117
|
|
Back to top |
|
|
|