keymove question (unextended)

[reybie]

I came across some codes from the old yahoo forums and I'm trying to implement it into my 6131 to see if it works on my RCA TV. I gave up on the extender since it was causing me more headaches that what I was trying to accomplish.

RCA Device 7 is CBL/0392, EFC = 227
RCA Device 5 is VCR/0522, EFC = 227
RCA Device 13 VCR/0202, EFC = 227
RCA Device 14 VCR/0060, EFC = 227

Does this look right how I put it in IR?
BoundDevice=TV
BoundKey=Shift-DVD
DeviceButton=N/A
DeviceType=VCR/DVD
SetupCode=0202
EFC=227

Thanks.

[mr_d_p_gumby]

Does this look right how I put it in IR?
BoundDevice=TV
BoundKey=Shift-DVD
DeviceButton=N/A
DeviceType=VCR/DVD
SetupCode=0202
EFC=227

If you are using an unextended 6131, then you'll have to enter the EFC as two hex bytes. Click the Hex Cmd option and enter:

HexCmd = 00 E3

(E3 is EFC 227 expressed as a hexadecimal number.)

This is required because the (unextended) 6131 uses "new-style" keymoves that work differently from most all other JP1 remotes.

[The Robman]

Or, if that in itself is too confusing, you could just enter them the old fasioned way using the remote. VCR/0202 is not present in the URC-6131, so you would need to make a dummy upgrade to re-create it.