Oppo BDP-83

stewman · Post by **stewman** » Fri May 07, 2010 10:18 pm

1. Device: Oppo BDP-83
2. Type of device: Blu Ray Player
3. Year: 2009
4. JP1/UEI Remote model: URC-8910
5. Do you have a JP1 cable? no
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? n/a

3FG · Post by **3FG** » Fri May 07, 2010 10:48 pm

The 8910 does not have built-in IR codes for Oppo, which use NEC1 IR protocol, device 73. So without a JP1 cable, there is no way to make the 8910 work.

Besides buying/making a cable, you could consider getting a more modern remote. Use the Lookup Tool (link above) and search on NEC1 protocol, dev1 = 73. Setup codes 0575/1525/2185 should provide most functions out of the box, and all of the setup codes can be customized to control the Oppo. Click at the far right to bring up a list of remotes which carry the various setup codes.

Capn Trips · Post by **Capn Trips** » Sat May 08, 2010 3:57 am

Actually, the 8910 is modem-upgradeable, so stewman could upload the upgrade via a wav file.

Post by **vickyg2003** » Sat May 08, 2010 4:42 am

I guess it would be helpful to see wav upgradable in the lookup tool.

3FG · Post by **3FG** » Sat May 08, 2010 8:30 am

vickyg2003 wrote:I guess it would be helpful to see wav upgradable in the lookup tool.

Yes, but I could just be a little more careful!

stewman, does your remote already have an upgrade loaded? We can make a simple upgrade for the Oppo83, but it will overwrite any previously loaded upgrade. If you already have an upgrade loaded, and know the contents of that previous upgrade, we can incorporate the previous upgrade into a new one.

There is a suitable upgrade file in the BluRay section, and you can adapt this to the modem upgrade yourself. If you don't feel comfortable doing that, I'll do it, but some functions need to be assigned to a button, or left out of the upgrade. In the list below, I've not shown functions like the number keys, and play. stop, arrow keys, etc, because the assignment of those is obvious. The following list shows the non-obvious asssignments that the above file upgrade contained, followed by unassigned functions. Let us know how you would like to handle any of these functions.

Code: Select all

Button   Function
CH+	page up
CH-	page down
Prev	return
Menu	title menu
Guide	popup menu
Exit	clear
F.Fwd	skip fwd
F.Rew	skip back
TV/Vid	home
REC	repeat
Enter	goto
Sleep	setup
PIP	pip
MOVE	angle
SWAP	zoom
L1	red
L2	green
L3	blue
L4	yellow

Unassigned Functions:
eject
equalization
pitch down
pitch up
sap
sound meter (psm)
+10
subtitle
audio
a-b replay
slow
keyboard
resolution
pal/ntsc/auto
discrete on
discrete off

stewman · Post by **stewman** » Sat May 08, 2010 10:32 am

Thanks for the quick replies. I'm new to all of this, so forgive me if I don't really know what I'm doing here. I found the .rdmu file you linked me to, but I'm not sure what to do with it. I do know how to update the remote via a wave file, but I'm not sure where I can get it.

Again, sorry for the stupid questions. Thanks again.

stewman · Post by **stewman** » Sat May 08, 2010 10:40 am

Also, I have not downloaded any upgrade files yet. As for the button functions, I'm not really all that worried about the advanced stuff - I just want mostly the basic playback controls.

Post by **vickyg2003** » Sat May 08, 2010 10:58 am

CAUTION, This process will delete any previous upgrades that you've received via modem.

You need to download thise files

IR,
IRtoWav,
RDF's and Images,
the upgrade that needs to converted
- and -
RM (RemoteMaster) and its java libraries
- or -
KM (Keymaster) to be used with Microsoft's Excel

Open the upgrade in RM or KM
Change the Remote to be the URC-8910
Check out the BUTTONS tab to make sure the functions are on the keys you want them

Open IR
Set the RDF Paths
do a file->New and select the URC-8910 from the dropdown
Select the Device Tab
Select Add
Copy the device from RM or KM
Paste into IR

If there is a "Required Protocol" listed,
Select the Protocol Tab in IR
Select ADD
Copy the required protocol
From the File menu in IR do a
export to WAV
select ->UPGRADES

Put the Remote into the modem mode
Play the wav

Then assign the setup code to a device the same way you would have for a built in setup code. You'll find the device/number and type in KM or RM.

stewman · Post by **stewman** » Sat May 08, 2010 11:03 am

Thanks a lot - I appreciate the detailed instructions. Now I can see how to create the wav file. I'll try it out. Thanks again!

Post by **The Robman** » Sat May 08, 2010 1:22 pm

I just created a WAV file for you here:
http://www.hifi-remote.com/forums/dload ... le_id=8394

The upgrade is called DVD/2000 so you will need to assign that to the DVD device button manually after you've added the upgrade.

stewman · Post by **stewman** » Sat May 08, 2010 1:31 pm

Thanks for the wav, robman - works like a champ now. I was following the steps that vickyg provided and I got all the way to the point of exporting to wav from IR, but it was grayed out. Now that I think about it, I don't think I downloaded IRtoWAV and I probably needed to do that. But thanks guys for all your help!

Post by **The Robman** » Sat May 08, 2010 1:52 pm

Yup, IRtoWAV is a separate program which is used by IR.exe, it's not part of IR.exe, so if you don't download it, you can't use it.