Dream Multimedia Dreambox DM100 sat receiver

[ross]

Hi!

Need help with a new protcol for a Dreambox DM100
device: sat
Learned signals is working.

http://www.hifi-remote.com/forums/dload ... le_id=7802

Thanks
ross

[Capn Trips]

I see nothing "new" about this protocol. All of your signals decode very cleanly as NEC1 Protocol, Device 16. Build your upgrade in RM or KM using those parameters, and the OBCs from the decoded learned signals as displayed on the learned tab, and you'll be fine.

[vickyg2003]

Hi Ross,

You've got an easy one there. You've got a clean set of working learns, using a really straight forward NEC1 signal.

I'd recommend reading the documents that you will find in the Captains signature.

This really is a good way to get your feet wet.

Good Luck

[ross]

I used the RM and it works

Thanks

[Capn Trips]

You're upgrade data is nice, but not as useful as your actualy RM file would be. Also, you provide too little information. What does "does not work" mean? NOTHING works? or the buttons are scrambled?

Looking at your learns vs. your upgrade file, it looks like you have assigned the wrong OBC values to the wrong functions.

Provide more info, and upload any files in question with links to make helping you easier.

EDIT: Obviousy the OP edited the immediately preceding post. Congrats on getting it to work.

[vickyg2003]

Congratulations! Feels good, doesn't it! Now remember to add the upgrade to the file section so that others can use it.

[3FG]

Comparing the learned signals with the upgrade data you just posted, the OBC values don't agree. In IR, the first learned signal is power = 64. In RM, as the upgrade imports, the first entry is the digit 0, and that is assigned OBC 64.

So, if the import occurred correctly, I would expect that functions would be scrambled onto unexpected keys.

If you post both the actual rmdu file and the resulting IR file, it will be much easier to see what is going on.

Did you set the remote model correctly at the top of RM?

Edited to say-- I type too slow and the OP edited (significantly) his post while I was typing.

[The Robman]

I used the RM and it works

Thanks

Please upload your RM file to the file section and then post a link to it here, so that if someone else finds this thread via a search they will also find your file.

Thanks,

[ross]

I have uploaded a IR file with many ir Device codes for dreambox inc. dm100

Note that this is for UCR-7780

http://www.hifi-remote.com/forums/dload ... le_id=7802
_____________________
ross

[The Robman]

Your IR file is no use to use, what we need is your RM file so we can re-create the upgrade for any remote. So, could you replace the IR file that you loaded with your RM file please.

[ross]

Now I have also uploaded a RM file

http://www.hifi-remote.com/forums/dload ... le_id=7813


__________________
ross