View previous topic :: View next topic |
Author |
Message |
jwcldwll
Joined: 15 Sep 2003 Posts: 39 Location: Connecticut |
Posted: Sun Aug 16, 2009 9:19 am Post subject: Sharp DTA-3500 Antenna |
|
|
1. Device: Active 5
2. Type of device: tv amplified remote controlled directional antenna
3. Year:2008
4. JP1/UEI Remote model: RS 15-2117
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? no
10. Learning remote question? na
Manufactured by DX Antenna Co, Kobe Japan under several brand names _________________ .......John |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Aug 16, 2009 9:35 am Post subject: |
|
|
Have you tried the Channel Master Upgrade?
Older models of the DX Antennas used to use Cable/41 and Cable/65, both NEC1 118 types. Power = EFC.234 in both upgrades but the numeric buttons are quite different. 9 = efc.041 in Cable/41. 9 =efc.245 in Cable 65. Cable 41 has recently made a comeback in the JP1.2 remotes, so this might be worth a shot. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Last edited by vickyg2003 on Sun Aug 16, 2009 10:38 am; edited 1 time in total |
|
Back to top |
|
|
jwcldwll
Joined: 15 Sep 2003 Posts: 39 Location: Connecticut |
Posted: Sun Aug 16, 2009 10:29 am Post subject: Thanks |
|
|
The box doesnt respond to the channelmaster Mod 9537 remote control- I will try your other suggestions Wednesday when I get home. _________________ .......John |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Aug 16, 2009 10:40 am Post subject: |
|
|
I was editing my post when you posted. I'm hoping to hear that you found a solution.
Give this a try CBL-0041 _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Mon Feb 06, 2012 6:41 pm Post subject: Re: Sharp DTA-3500 Antenna |
|
|
jwcldwll wrote: | 1. Device: Active 5
4. JP1/UEI Remote model: RS 15-2117
5. Do you have a JP1 cable? Yes
Manufactured by DX Antenna Co, Kobe Japan under several brand names |
Found a match and recorded the IR signals with the JP1 tools to create the respective files.
This one is a little odd because it seems to interleave RC5 signals in between F12 but only for two of the four available commands. I decided to create an RMDU file based on the F12 signals. If this doesn't work then we'll push this into the protocol decode forum with hopes that someone can create an executor for it. _________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|