Did I SHOOT my self in the Foot?

[samuelrock]

Well its been some time sence i used my jp1, I set up a few remotes when i got it and have done little past adding a few upgrades.

WELL>>>>>>>>>>>>>>

i have the URC-6131 in fact i have 4 of them, set them up like 3 years ago, i was cheep when i installed the eeproms as i stole some from a few blue directv v1 URC remotes. now i would like to set my audio device button to turn on my HK AVR-500. i currently have the power on mapped to the play button.

so to make a macro that turns on my AVR-500 when the device key is pressed i need to use extenders, correct?

to use extenders with all the bells, i need a 2k eeprom correct?

I think the eeproms i pulled from the blue directv remotes are 1k its been so long i dont remember. does any one know what eeprom came in the directv remotes?

SAM

[vickyg2003]

so to make a macro that turns on my AVR-500 when the device key is pressed i need to use extenders, correct?

Yes that is correct. You need to use an extender to make the device keys do anything other than select a device.

Perhaps you can tell how big your eeprom is if you open your remote and can magnify the eeprom enough to see a part number. You can also try the extenders to see which one works.

[The Robman]

You can tell if you have 1k or 2k by downloading using IR.

And yes, if you want to use an extender, you'll need a 2k chip.

[ElizabethD]

Hi Rob,
http://www.hifi-remote.com/forums/viewtopic.php?t=4437