|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Zellarman
Joined: 11 Oct 2006 Posts: 56 Location: Long Island, NY |
Posted: Thu May 07, 2009 5:26 pm Post subject: Problem w/ new JP-1 cable? |
|
|
First a little history. I had an extended 9910 working great for quite a while, then a new TV necessitated some reprogramming. My old JP-1 cable seemed to be damaged, I kept getting the "Low SDA error" so I figured my cable was bad.
I purchased a new JP-1 cable from Tommy Tyler, made sure I had the latest driver and now
When downloading from the remote I get the warning "bad checksum at address $0000. Expected $4C $B3, but found $5C $A3"
When uploading to the remote I get the error "Data readback differs from data written"
The remote gets some of the upload, some functions still work and the time is correct, BUT the device keys don't work, or only partially work, and it seems that the remote still thinks it's in programming mode (after a few seconds it times out and says "exit setup"
Maybe I'm missing something, or maybe the cable is bad?
I'm just looking for some ideas, and I have NONE |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Thu May 07, 2009 8:05 pm Post subject: |
|
|
Classic symptoms of low batteries. Also, the latest driver doesn't seem to work as well for most people as the previous version HERE. |
|
Back to top |
|
|
Tommy Tyler Expert
Joined: 21 Sep 2003 Posts: 412 Location: Denver mountains |
Posted: Sat May 09, 2009 7:00 pm Post subject: |
|
|
Chris,
Keep me in the loop on your problem, particularly if you feel the interface may be faulty.
Tommy |
|
Back to top |
|
|
ElizabethD Advanced Member
Joined: 09 Feb 2004 Posts: 2348
|
Posted: Sat May 30, 2009 8:09 pm Post subject: |
|
|
Zellarman,
I assume we're talking about the USB cable not paraller, correct? If yes,
What sort of computer is it? Make, model, processor speed, operating system, single processor or dual, hyperthreading or not, USB1 or USB2?
Do you see many, many files such as these (written during the few seconds before the failure announcement)
$$DEBUG$$20080406.txt
$$DEBUG$$20080407.txt
$$DEBUG$$20080501.txt
$$DEBUG$$20080502.txt
in the IR directory?
And do you sometimes, right after the checksum error, see an error 'DevType15 4095 is not currently assigned...'? _________________ Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|