View previous topic :: View next topic |
Author |
Message |
rwkyle
Joined: 28 Mar 2009 Posts: 1
|
Posted: Sat Mar 28, 2009 3:26 pm Post subject: URC 9910 RF Repair |
|
|
I have a 9910 that the RF has stopped working. I believe it happened when my daughter dropped it so I am pretty sure it is not the RF base unit. Has anybody had any success repairing the RF part of the remote and of course if you have how?
Since these are not available anymore any help would be greatly appreciated. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Mar 28, 2009 7:08 pm Post subject: |
|
|
Best I can suggest is that you take the remote apart and look for anything that's obviously not right. The RF puck is near the top of the remote and is quite obvious. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
akkhandelwal
Joined: 08 May 2009 Posts: 10
|
Posted: Mon May 11, 2009 6:38 pm Post subject: |
|
|
I had a similar situation and was able to open and repair it. If you drop it, RF is the first thing to stop working since it a seperate module attached to the main board with 4 pin connector and joint at the pins are very weak.
Look at http://www.hifi-remote.com/forums/viewtopic.php?t=10962 |
|
Back to top |
|
|
|