T-Home X 300T IPTV

[jfkispresident]

Hi guys,

i placed a topic in the "Slingbox" section but the blocking point seems to be the decoding of the learned IR signals.

Therefore I would appreciate your help regarding this IR file I uploaded here: http://www.hifi-remote.com/forums/dload ... le_id=5428

I learned the remote codes to a URC-7562 but the newest version of ir.exe and decodeir.dll would not decode the learned+downloaded signals.

The original post is here: http://www.hifi-remote.com/forums/viewtopic.php?t=9530

Now I have no idea what to do.

Thanks for your support!

greetz, Jens


PS:

I didn't find any comment on double postings, so please don't blame me for putting the same topic in two forum categories, as my problem seems to be a decoding problem, which I didn't new prior.

[binky123]

Code: Select all

Key		OBC	Hex
1		2	02
2		5	05
3		6	06
4		9	09
5		10	0A
6		13	0D
7		14	0E
8		17	11
9		18	12
0		21	15
+10{-/--}	37	25
AV{Exit_20}	34	22
MUTE{Select}	30	1E
LEFT		29	1D
RIGHT		33	21
UP		25	19
DOWN		26	1A
CH+{Bright+}	41	29
CH-{Bright-}	45	2D
VOL-{Color-}	42	2A
VOL+{Color+}	38	26
Menu		90	5A
PLAY{TextOff}	54	36
PAUSE{Hold}	54	36
REW{TextOn}	69	45
FFWD{Expand}	70	46
SP/LP{Red}	74	4A
STOP{Green}	77	4D
REC{Yellow}	78	4E
AUTO{Blue}	81	51

Upgrade protocol 0 = 01 A2 (HCS08) Custom Protocol for T-Home 300T
 20 17 23 46 21 86 81 10 08 08 00 9D 00 9D 00 9D 
 00 9D AD D4 FF FF FF FF 02 CC FF 5F 
End

Upgrade protocol 0 = 01 A2 (S3C8+) Custom Protocol for T-Home 300T
 43 8B 21 8B 14 86 81 10 08 08 00 9D 00 89 00 9D 
 00 89 AD D4 FF FF FF FF 02 8D 01 46 
End

Upgrade Code 0 = 0C 2C (CBL/1068) Test T-Home
A2 00 61 99 40 02 05 06 09 5A
End

I used fixed data of 99 40(the first 10 bits of the decode). The decodes with 17 bits, I post padded with 10. I used a bit time of 314uS.
Hex
02 19 bits, MSB value = 10011001 01 00000010 0
05 17 bits, MSB value = 10011001 01 00000101 0
5A 19 bits, MSB value = 10011001 01 01011010 0

[khauert]

Hi, I am new and this is my first post.
I have the same problem as jfk with a simular box (x301t).
I also get the messege "phase encoded".

Since my box is simply the same as the x300t, just with a bigger HDD I think the codes should be the same.

But I have absolutly no idea what binky is talking about.
I tried to create a .bin file with this information, and I don't know what protocoll to use or what all those numbers mean (except OBC and HEX, I know where they should go).

Maybe you can tell me how I can use all these numbers to get my .bin or maybe jfk has managed to create one already and can upload it.

Thanks in advance, you would be great help

[binky123]

Edit RM's protocols.ini and add:

Code: Select all

[T-Home 300T]
PID=01 A2
FixedData=99 40
Code.S3C80=43 8B 21 8B 14 86 81 10 08 08 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 02 8D 01 46 
Code.HCS08=20 17 23 46 21 86 81 10 08 08 00 9D 00 9D 00 9D 00 9D AD D4 FF FF FF FF 02 CC FF 5F 

Then change Device 0: 153 and Device 1: 64.
Make Sure Fixed Data entry shows as 99 40 in RemoteMaster.
Fill in the OBC columns for your functions.
Export BIN.

[khauert]

Hi,
thanks for the help.
Worked perfectly, had to find out some OBC for other bottuns, what now everything works.

I posted the .bin file for a Slingbox in the file section:
http://www.hifi-remote.com/forums/dload ... le_id=5518

[baguesse]

Hi,

I have found out out that because my Slingbox classic is a UK box I needed the _RV.bin file (Iguess a new .binvexport of the RDF file for RV chip) in RM is the answer. Howver I have neither of those and I am not familiar with RM.

Could you please provide it because currently, they error message I am getting in Slingplayer is 'operation failed 0x93260001' I supposed it has to do with the fact that I renamed the .bin file from _PV to _RV which was the only way I could get it past the previous issue of "slingplayer cannot load ir file"

My IR blaster version is 4. Does it matter?

Please help me by providing another export of the .bin file for RV chips

Thanks very much in advance,

[baguesse]

Hi,

I am desperate to get an _RV export of the .bin file for the T-Home X300T. Indeed, my slingbox is a UK one and thus the file currently available http://www.hifi-remote.com/forums/dload ... le_id=5518 and posted by Khauert is not the correct one (_PL) for my slingbox chip and a simple renaming to _RV will not work and generates an error message (0x9326001) when inputting the C0766 code in the cable/other input entry.

I would have tried to do another export myself but the rdf source file is not available and thus I cannot use Remote Master (nor do I really know how to use it)

Please help me

Thank You !

[Capn Trips]

I would have tried to do another export myself but the rdf source file is not available and thus I cannot use Remote Master

All four versions of the Slingbox rdf are present in the current rdf.zip distribution, so I don't really see what your problem is getting the required rdf.

Anyways, here's a converted BIN, but I didn't look at button assignments, so I don't know if any of them make any sense.

[baguesse]

I downloaded the file you posted and It works perfectly!!

You made my day !

Thanks again!

[The Robman]

It doesn't appear that anyone has loaded a regular upgrade file for this device, so I have created one based on my best guesses as to the actual button names (but I don't expect that they're all correct).

http://www.hifi-remote.com/forums/dload ... le_id=5687

[The Robman]

The Scientific Atlanta Explorer 8455DVB "PVR" appears to use the same protocol (with different device codes and OBCs)

http://www.hifi-remote.com/forums/dload ... le_id=5688