View previous topic :: View next topic |
Author |
Message |
villiageidiot
Joined: 09 Dec 2005 Posts: 7
|
Posted: Sat Feb 02, 2008 2:15 pm Post subject: Atlas 1056B01 button problem |
|
|
Hello,
I was just programming my new Atlas remote, I last programmed the "tune in keys" and noticed afterward that when I press the number "2" button, the cable box enters channels "0-0-1" I don't what I could have done. I have been looking to see if their is some kind of master reset code for this remote and I can't find anything. Does anyone know how to fix this? Thanks. |
|
Back to top |
|
|
speaker.guy Exile Island Resident
Joined: 17 Apr 2007 Posts: 260
|
Posted: Sat Feb 02, 2008 2:41 pm Post subject: |
|
|
Tune In 2 is the "On Demand" button. It is programmed by the cable company to tune cable box channel 1, the On Demand Channel. I think you can clear that out with a reset... |
|
Back to top |
|
|
villiageidiot
Joined: 09 Dec 2005 Posts: 7
|
Posted: Sat Feb 02, 2008 2:46 pm Post subject: |
|
|
Channel 2 is my local PBS channel and yes, channel 1 is on demand. But if I wanted to tune channel 200, I can't. Do you know how to do a reset? This remote has an "On demand" button that automatically tunes to 001. The "2" button is now copying that button. |
|
Back to top |
|
|
villiageidiot
Joined: 09 Dec 2005 Posts: 7
|
Posted: Sat Feb 02, 2008 2:57 pm Post subject: |
|
|
Fixed it! I have been searching uei's website for a reset code and found one for a different remote. I put in code 980 and it fixed it. My existing codes are all still there too! Very goofy, anyway, I got my 2 back.
Thanks |
|
Back to top |
|
|
|